|
|
| (14 intermediate revisions by 5 users not shown) |
| Line 1: |
Line 1: |
| =Axiom Alpha Prototype=
| | {{delete|This list is currently not in use - outdated.}} |
|
| |
|
| == DNG Converter Software==
| | Please use http://lab.apertus.org instead for task management. |
| * Add other DNG tags such as dead pixels, register settings, black level calibration data, etc.
| |
| * Implement the matrix as a LUT.
| |
| * Eventually port to from python to C/C++
| |
| | |
| Code: https://github.com/apertus-open-source-cinema/CMV12000_DNG_Writer
| |
| | |
| ==Linux Bash script/C Code to interpret all image sensor registers==
| |
| | |
| Sensor Datasheet: https://github.com/apertus-open-source-cinema/alpha-hardware/raw/master/Datasheets/datasheet_CMV12000%20v8.pdf
| |
| | |
| Basics: [[Axiom_Alpha_Prototype#Reading_and_Writing_Sensor_Register]]
| |
| | |
| The current memory mapping is 32bit aligned, so the 16bit SPI registers show up as 32bit where only 16bits are significant.
| |
| | |
| ==RAW image metadata reader==
| |
| | |
| All sensor registers are embedded into the raw image formats.
| |
| We need code that can read/display these values in a human readable way.
| |
| (Similar to the above, but not necessarily targetted at the ARM platform)
| |
| | |
| ==dead/hot pixel detection software==
| |
| | |
| A software that is supplied with several raw images and is able to detect dead/hot pixels and output all detected pixels positions.
| |
| | |
| ==Flat-field correction generation software==
| |
| | |
| A software that is supplied with several (around 20 is sufficient) raw images of an out of focus 30% grey wall and is able to generate the sensitivity offset of each photosite and a resulting flat-field correction matrix (https://en.wikipedia.org/wiki/Flat-field_correction).
| |
| The samples images are preferably done with a fast 50mm lens stopped down to F4-F5.6 facing an evenly lit surface (white wall with area at decent distance from wall light). To further smooth results the lens should be set to out-of-focus. We need to test if these measurements work even better with a lee filter in front of the sensor instead of a lens.
| |