Difference between revisions of "AXIOM Beta/Enclosures"
| Line 34: | Line 34: | ||
Onshape 3D CAD: https://cad.onshape.com/documents/d3c8114f3340b3a0f1148960/w/c0701faed5886a1b055b595f/e/354e8363457cbbbdec3ed121 | Onshape 3D CAD: https://cad.onshape.com/documents/d3c8114f3340b3a0f1148960/w/c0701faed5886a1b055b595f/e/354e8363457cbbbdec3ed121 | ||
====IR/UV Cut-off Filter==== | ====IR/UV Cut-off Filter==== | ||
http://www.optics-online.com/IRC.asp?PN=IRC30-50x50 39$ for sample (volume pricing likely lower and on request), 1.5mm thickness | http://www.optics-online.com/IRC.asp?PN=IRC30-50x50 50x50mm for 39$ for sample (volume pricing likely lower and on request), 1.5mm thickness | ||
====Thread Inserts=== | ====Thread Inserts=== | ||
Revision as of 11:04, 26 November 2017
1 Simple Enclosure
The Simple Enclosure is meant to wrap a "skin" around the camera's electronics and CNC milled metal skeleton parts. The Simple Enclosure is designed in a way that can be produced with any consumer 3d printer.
2 Transparent Enclosure
A transparent enclosure is useful for showcasing the camera's printed circuit boards and for allowing to understand quickly what may or may not be going on simply by looking at the camera's status LEDs. The design is made so it can be laser cut with a 3mm thick acrylic glass. Acrylic glass comes is many variations and colors and could also be used to print logos or text labels on the exterior.
Simple transparent enclosure for the AXIOM Beta, version 0.2.
Key : Black => to be cut ; Red => to be engraved ; Green => comments (not to be cut or engraved)
Open and edit the above image with Inkscape or similar.
Note: There may be scope for improvement by making the case slightly bigger (few mm wider for the front and back side), so that the HDMI cable can fit nicely in the enclosure (and you don't need to shave some plastic off the cable). If you make any alterations please update this page with modifications accordingly.
3 AXIOM Beta II: Production Ready Full Enclosure
CNC milled from aluminum.
Onshape 3D CAD: https://cad.onshape.com/documents/d3c8114f3340b3a0f1148960/w/c0701faed5886a1b055b595f/e/354e8363457cbbbdec3ed121
3.1 IR/UV Cut-off Filter
http://www.optics-online.com/IRC.asp?PN=IRC30-50x50 50x50mm for 39$ for sample (volume pricing likely lower and on request), 1.5mm thickness
4 =Thread Inserts
We want to use thread inserts instead of cutting threads into the aluminum ( -> stronger, less production steps, easier to replace thread insert when damaged later):
Ensat from Kerb Konus seems very suitable:
http://www.kerbkonus.de/proddb/assistent.php?lang=en&a=presel_ds&ds=30
UNC 1/4-20 ~ 1€ / pcs (excl. taxes)
UNC 3/8-16 ~ 2.50€ / pcs (excl. taxes)
M3x6 ~ 0.44€ / pcs (excl. taxes)
M4x8 ~ 0.55€ / pcs (excl. taxes)
M5x10 ~ 0.60€ / pcs (excl. taxes)
5 General Enclosure Design Topics
From Labs:
Axiom Beta new enclosure and labeling
6 Legacy
Switchable ND Filters not planned currently