Difference between revisions of "List of compatible HDMI devices"
From apertus wiki
| Line 15: | Line 15: | ||
Verified to be working with '''Atomos Ninja BLADE''', firmware version 5.2. | Verified to be working with '''Atomos Ninja BLADE''', firmware version 5.2. | ||
To enable the Atomos Ninja BLADE mode: | To enable the Atomos Ninja BLADE mode, edit setup.sh:: | ||
./gen_init.sh SHOGUN | ./gen_init.sh SHOGUN | ||
Revision as of 21:11, 21 May 2020
1 HDMI Recorder Devices Confirmed Working
1.1 Atomos Shogun
AXIOM Beta supports up to 1080p60
Choose the SHOGUN profile, edit setup.sh:
./gen_init.sh SHOGUN
1.2 Atomos Ninja
AXIOM Beta supports up to 1080p30
Verified to be working with Atomos Ninja BLADE, firmware version 5.2.
To enable the Atomos Ninja BLADE mode, edit setup.sh::
./gen_init.sh SHOGUN
1080p25 mode is known to work on the Ninja BLADE if using the SHOGUN profile and then setting
scn_reg 0 2640
1.3 Blackmagic Video Assist and Video Assist 4K
AXIOM Beta supports up to 1080p60
Changes for Blackmagic Video Assist and Video Assist 4K, tested on firmware 2.3.1:
edit setup.sh
Add:
./gen_init.sh 1080p60BMVA
comment out any other ./gen_init.sh entries.
edit gen_init.sh
Replace:
SHOGUN
With:
SHOGUN|1080p60BMVA|1080p30BMVA
'''Add the section below:'''
1080p50BMVA|1080p25BMVA)
scn_reg 0 2640 # total_w
scn_reg 1 1125 # total_h
scn_reg 2 60 # total_f
scn_reg 4 262 # hdisp_s
scn_reg 5 2182 # hdisp_e
scn_reg 6 45 # vdisp_s
scn_reg 7 1125 # vdisp_e
scn_reg 8 0 # hsync_s
scn_reg 9 2100 # hsync_e
scn_reg 10 4 # vsync_s
scn_reg 11 9 # vsync_e
scn_reg 32 252 # pream_s
scn_reg 33 260 # guard_s
scn_reg 34 294 # terc4_e
scn_reg 35 296 # guard_e
;;
1080p24BMVA)
scn_reg 0 2750 # total_w
scn_reg 1 1125 # total_h
scn_reg 2 60 # total_f
scn_reg 4 262 # hdisp_s
scn_reg 5 2182 # hdisp_e
scn_reg 6 45 # vdisp_s
scn_reg 7 1125 # vdisp_e
scn_reg 8 0 # hsync_s
scn_reg 9 2100 # hsync_e
scn_reg 10 4 # vsync_s
scn_reg 11 9 # vsync_e
scn_reg 32 252 # pream_s
scn_reg 33 260 # guard_s
scn_reg 34 294 # terc4_e
scn_reg 35 296 # guard_e
;;