|
|
| (7 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| =Axiom Alpha Prototype=
| | {{delete|This list is currently not in use - outdated.}} |
|
| |
|
| == DNG Converter Software==
| | Please use http://lab.apertus.org instead for task management. |
| * Add other DNG tags such as dead pixels, register settings, black level calibration data, etc.
| |
| * Implement the matrix as a LUT.
| |
| * Eventually port to from python to C/C++
| |
| | |
| Code: https://github.com/apertus-open-source-cinema/CMV12000_DNG_Writer
| |
| | |
| ==Linux C/C++ commandline tool to interpret all image sensor registers==
| |
| | |
| We require a c/c++ commandline tool that takes the 128x16bit sensor dump as stdin.
| |
| Displays the registers in a hex editor like way with addresses and content in a table and next to the table the human readable interpretation of the corresponding sensor parameters (exposure time, etc.)
| |
| | |
| Sensor Datasheet: https://github.com/apertus-open-source-cinema/alpha-hardware/raw/master/Datasheets/datasheet_CMV12000%20v8.pdf
| |
| | |
| Code: https://github.com/apertus-open-source-cinema/alpha-software/tree/master/misc_scripts_and_utilities/metadata-reader
| |
| Bash script example: [[Axiom_Alpha_Prototype#Reading_and_Writing_Sensor_Register]]
| |
| | |
| ===Notes===
| |
| * The current memory mapping is 32bit aligned, so the 16bit SPI registers show up as 32bit where only 16bits are significant.
| |
| * To extract the last 128x16bit from a raw image file use:
| |
| cat file.raw16 | dd bs=256 skip=98304
| |
| Or if you have a raw16.xz compressed file you can do it all in one piped command (assuming the c/c++ tool is called "register_info"):
| |
| xzcat file.raw16.xz | dd bs=256 skip=98304 | register_info
| |
| * Sample files and format specifications of RAW16 can be found here: [[RAW16]]
| |
| | |
| ==RAW image metadata reader==
| |
| | |
| All sensor registers are embedded into the raw16 image format.
| |
| Details about the file format: [[RAW16]]
| |
| | |
| Code: https://github.com/apertus-open-source-cinema/alpha-software/tree/master/misc_scripts_and_utilities/metadata-reader
| |
| | |
| ==dead/hot pixel detection software==
| |
| | |
| A software that is supplied with a raw16 image and is able to detect dead/hot pixels and output all detected pixels positions.
| |
| | |
| https://github.com/apertus-open-source-cinema/alpha-software/tree/master/misc_scripts_and_utilities/hot_pixel_detection
| |
| | |
| ==Flat-field correction generation software==
| |
| | |
| A software that is supplied with several (around 20 is sufficient) raw images of an out of focus 30% grey wall and is able to generate the sensitivity offset of each photosite and a resulting flat-field correction matrix (https://en.wikipedia.org/wiki/Flat-field_correction).
| |
| The samples images are preferably done with a fast 50mm lens stopped down to F4-F5.6 facing an evenly lit surface (white wall with area at decent distance from wall light). To further smooth results the lens should be set to out-of-focus. We need to test if these measurements work even better with a lee filter in front of the sensor instead of a lens.
| |