Difference between revisions of "Beta CMV12K THT Sensor Board"

Latest revision as of 15:29, 18 December 2021

Note: For the development ZIF version of this sensor board see Beta CMV12K ZIF Sensor Board

Full size image

1 About

The CMV12000 THT (Through-hole technology) Sensor Board is using a special socket for hosting the CMV12000 image sensor. The sensor is installed during the assembly process and cannot be removed any more afterwards without special tools. If your application requires switching/swapping image sensors please consider the ZIF Sensor Board instead.

Full size image

2 Image Sensor Features

CMOS
global shutter
APS-C / Super35 diameter
12 Megapixels (4096 x 3072) resolution
320 frames per second (8bit), higher values at reduced resolution, lower values at higher bitdepth
8, 10 or 12bit output
10 stops (native), 15 stops with PLR HDR dynamic range
5.5µm pixel size

3 PCB Features

PCB hole behind/below image sensor for optional sensor cooling
32 of 64 LVDS pairs connected

PCB Bottom.
PCB Top.

4 Revisions

Current:

AXIOM Beta Sensor CMV12000 THT V0.16

Sources: https://apertus-open-source-cinema.github.io/pcbs/index.html#/boards/AXIOM%20Beta%20Sensor%20CMV12000%20Tht/0.16%20r1.8c/default/Beta

Archive:

AXIOM Beta Sensor CMV12000 v0.15

AXIOM Beta sensor CMV12000 v0.14

AXIOM Beta Sensor CMV12000 THT v0.13

@@ Line 1: / Line 1: @@
-__NOTOC__
 '''Note:''' For the development ZIF version of this sensor board see [[Beta CMV12K ZIF Sensor Board]]
@@ Line 10: / Line 8: @@
 ==About==
-The CMV12000 THT (Through-hole technology) Sensor Board is suited to applications where the sensor-front-end won't be being removed on a regular basis. THT refers to a mounting scheme used for electronic components that involves the use of leads on components that are inserted into holes drilled into printed circuit boards (PCB) and soldered to pads on the opposite side either by manual assembly (hand placement) or by the use of automated insertion mount machines.
+The CMV12000 THT (Through-hole technology) Sensor Board is using a special socket for hosting the CMV12000 image sensor. The sensor is installed during the assembly process and cannot be removed any more afterwards without special tools. If your application requires switching/swapping image sensors please consider the [[Beta_CMV12K_ZIF_Sensor_Board|ZIF Sensor Board]] instead.
@@ Line 20: / Line 18: @@
+==Image Sensor Features==
-==Features==
+* CMOS
+* global shutter
-* CMOS.
+* APS-C / Super35 diameter
-* Global shutter.
+* 12 Megapixels (4096 x 3072) resolution
-* APS-C / Super35.
+* 320 frames per second (8bit), higher values at reduced resolution, lower values at higher bitdepth
-* Resolution: 12M (4096 x 3072).
+* 8, 10 or 12bit output
-* 320 Frames-per-second.
+* 10 stops (native), 15 stops with PLR HDR dynamic range
-* 8,10 or 12bit Output.
+* 5.5µm pixel size
-* Dynamic range: 10 stops (native), 15 stops with PLR.
-* Pixel size: 5.5µm.
-*  Zero insertion force socket PCB version available
+==PCB Features==
+* PCB hole behind/below image sensor for optional sensor cooling
+* 32 of 64 LVDS pairs connected
 <gallery mode="packed" heights="180">
@@ Line 38: / Line 37: @@
 Image:AXIOM_Beta_Sensor_THT_0.13_Top.png| PCB Top.
 </gallery>
 ==Revisions==
@@ Line 46: / Line 43: @@
 [[AXIOM Beta Sensor CMV12000 THT V0.16]]
+Sources: https://apertus-open-source-cinema.github.io/pcbs/index.html#/boards/AXIOM%20Beta%20Sensor%20CMV12000%20Tht/0.16%20r1.8c/default/Beta
@@ Line 52: / Line 51: @@
 [[AXIOM Beta Sensor CMV12000 v0.15]]
-[[axiom beta sensor cmv12000 v0.14]]
+[[AXIOM Beta sensor CMV12000 v0.14]]
 [[AXIOM Beta Sensor CMV12000 THT v0.13]]