Ergonomics Workgroup

1 Meeting 27th of October, 2014

Are there HDMI connectors pointing away from the PCB surface they are mounted to? -> http://lab.apertus.org/T93

Lets research metal bending processes and prices.

Lets create a Grip Handle Concept and physical mock ups for testing. -> http://lab.apertus.org/T95

We need to design the stray light filter part in the AXIOM Beta as independent part from the lens mount so swapping image sensor means you do not need to swap the lens mount part as well for the matching stray light filter.

Cheese plate concepts for camera back plate and top plate (illustrations will follow).

Lets research leather (fake or fair) as material for some camera parts (hand grip, etc.)

2 Meeting 3rd of November, 2014

2.1 Researching the lens mount patent situation

Mechanical dimensions cannot be patented so anyone can build a mount that particular lenses.

Of course the manufacturer names (Sony, Canon, etc.) are trademarked so we cannot advertize any mount as "Sony E-mount" we can only call it "e-mount" or "compatible with e-mount". The word "e-mount" is very likely not trademarked.

The electronic data exchange protocol is under a Sony/Canon/etc. licenses and to acquire it you need to sign contracts and pay fees, etc. In Europe though it is not illegal to reverse engineer something if it is required for you to make specific things "work" so we will be able to listen to what the lens is saying and being told to do and would be able to create software that sends/receives "similar" commands. This is in full compliance with the law.

2.2 Camera Enclosure Surface Finish Notes

The typical options for surface finished of aluminum are sandblasting, abrasive blasting, anodizing, painting, powder coating.

The typical camera surface finish is called "Runzellack" which translates to: wrinkle paint.

Painting Aluminum is not a trivial process.

Labels can easily be CNC engraved, then painted and the wet paint wiped away, that way the paint only remains in the engraved areas and dries there.

laser engraving is another cheap way to create labels but we would need to outsource that

2.3 Manufacturing Material Notes

There are innovative wood-plastic combinations: http://www.fasal.at/ that feel similar like wood and are bio degradable. These can be used like any other injection molding raw material. The material is still in research and long term integrity, UV-resistance, etc. are unknown.

3 Meeting 10th of November, 2014

Concept to mill the enclosure out of laser cut aluminium sheets (shown here with E-mount tube) :

Drawing for the laser cut aluminium parts for the Beta enclosure. Raw parts for milling File:Laser cut parts.pdf

4 Meeting 17th of November, 2014

PCBs should have rounded corners to match the round corner design of the AXIOM CI and to reduce risk of injury with sharp PCB edges.

Cheeseplate backplate concept:

We will inquiry receiving samples from a powder coating service provider.

Method for getting HDMI/SDI connectors to the side/back of the camera:

AXIOM Beta Grip Handle Accessory Concept by Christoph Varga:

*comment: does not work since the soldering of usual connectors (hdmi,..) is not precise enough in positioning to make this adapter working. also there are shielding issues and every connector in between signal source and target is a loss in signal quality.
SDI needs a different 'high speed shield' wich is the left (from operators perspective) small board on the object (operator-object optical axis) side. they could be transmitted through SMA connectors which then have to get transformed to BNC somewhere outside the camerabody.

AXIOM Beta Cupboard Rig Concept by Christoph Varga:

5 Meeting 16th of Feburary, 2015

• Yolk Y2 Design ideas inspiration: http://www.designdirectory.com/yolk/Y2-digital-cinema-camera
• PE/PU foam sample touching: cardboard case as standard option, pelicase/suitcase as more expensive option to choose from, inlay foam should be the same the same, PE for bottom, PU for top, nawapur not good because of color, lack of stiffness and renewable sources are nice but where do they come from, are they organically farmed, was it fair traded? etc. too many uncertainties.
• button sample pressing/touching and evaluation
• high speed modules should be on the right camera side (seen from the camera back) or towards the back of the camera
• Mini 'DISPLAYPORT' connectors were selected as primary first module interface as there are no license issues / royalty fees compared to HDMI
• New PCB stack concept:

6 Notes for next meeting

please add them here

• ideas/discussion input for the modularity of the PCB-design of the AXIOM GAMMA model

(what modules and sizes makes most sense for different camera form factors and as electronic PCB design too)