Difference between revisions of "AXIOM Remote"
From apertus wiki
(→Status) |
|||
| Line 5: | Line 5: | ||
* Printed circuit boards for a first version prototype have been designed and populated. | * Printed circuit boards for a first version prototype have been designed and populated. | ||
* | * Haptic button options are being tested. | ||
* PCB has been debugged. | * PCB has been debugged. | ||
* Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts). | * Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts). | ||
* UI design is ongoing but further software refinements are still required (please see this page's footer if you'd like too assist). | * UI design is ongoing but further software refinements are still required: https://lab.apertus.org/T1116 (please see this page's footer if you'd like too assist). | ||
Revision as of 10:32, 3 February 2019
1 Status
November 2018
- Printed circuit boards for a first version prototype have been designed and populated.
- Haptic button options are being tested.
- PCB has been debugged.
- Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
- UI design is ongoing but further software refinements are still required: https://lab.apertus.org/T1116 (please see this page's footer if you'd like too assist).
AXIOM Team Talk 14.3 (Oct 2018) covered AXIOM Remote development progress.
2 Overviews |
3 Technical |
4 Resources |
|
AXIOM Remote Concept Rendering 2018 - Note: Design is subject to change as improvements are made.