Difference between revisions of "USB 3.0 Plugin Module Gearwork"
(Created page with " PAGE UNDER CONSTRUCTION == Project Summary == The AXIOM Beta currently features PCIe x1 connectors on the main board which are capable of transferring data at a rate of 6Gb...") |
|||
| Line 9: | Line 9: | ||
'''Mentored by: Bertl.''' | '''Mentored by: Bertl.''' | ||
'''Implemented by: Apurva Nandan'' | '''Implemented by: Apurva Nandan''' | ||
---- | ---- | ||
Revision as of 15:08, 23 August 2019
PAGE UNDER CONSTRUCTION
1 Project Summary
The AXIOM Beta currently features PCIe x1 connectors on the main board which are capable of transferring data at a rate of 6Gbit/s or more. Several high speed plugin modules like HDMI, DP or SDI can be plugged into these thereby providing additional functionalities.Currently, the AXIOM Beta lacks a USB 3.0 interface for direct transmission of RAW video data to a connected PC for recording/streaming purposes. This project is about implementing a USB 3.0 gearwork using the LVDS connection exposed by the PCIe connectors for streaming 4K 12-bit video at 25 FPS. There is no aftermarket solutions for high speed LVDS to USB 3.0 conversion. Only 16/24/32-bit parallel data to USB 3.0 bridges are available. Hence, a USB 3.0 plugin module has been designed by apertus° featuring a MachXO2 Lattice FPGA and FT601Q/FT602 FTDI IC for this purpose.
Google Summer of Code 2019 project.
Mentored by: Bertl.
Implemented by: Apurva Nandan
2 Important URLs
- Code [1]
- Proposal [2]
- Report [3]
- Project Page at GSoC'19 [4]
- Lab Task [5]
3 References
- USB 3.0 Plugin Module Wiki [6]
- Lattice MachXO2 FPGA [7]
- Implementing High-Speed Interfaces with MachXO2 Devices - TN1203 [8]
- FTDI FT601Q chip [9]