Difference between revisions of "AXIOM Remote/Development"
BAndiT1983 (talk | contribs) |
BAndiT1983 (talk | contribs) |
||
| Line 14: | Line 14: | ||
===FT4232H Wiring UART=== | ===FT4232H Wiring UART=== | ||
FT4232H features 4 UART ports, in this example we utilize port C | FT4232H features 4 UART ports, in this example we utilize port '''C'''. Under Linux the FT4232H should simply show up as ports '''/dev/ttyUSB0''' to '''/dev/ttyUSB3''' where port '''C''' from the above example would correspond to '''/dev/ttyUSB2'''. | ||
Note that the Transmit (TXD) and Receive (RCD) lines need to be cross wired meaning TXD needs to be connected to RXD and RXD to TXD. You can choose any GND pin though. | Note that the Transmit (TXD) and Receive (RCD) lines need to be cross wired meaning TXD needs to be connected to RXD and RXD to TXD. You can choose any GND pin though. | ||
{| | {| | ||
! Name | !Name | ||
! | !FT4232H pin | ||
!Remote pin | |||
|- | |- | ||
|GND | |||
|GND | |GND | ||
|GND | |GND | ||
| Line 26: | Line 29: | ||
|TXD | |TXD | ||
|CD0 | |CD0 | ||
|RXD | |||
|- | |- | ||
|RXD | |RXD | ||
|CD1 | |CD1 | ||
|TXD | |||
|} | |} | ||
[[File:Axiom-remote-uart-pins.jpg|200px]] [[File:FT4232H-pinout-uart-portc.jpg|200px]] | [[File:Axiom-remote-uart-pins.jpg|200px]] [[File:FT4232H-pinout-uart-portc.jpg|200px]] | ||
==JTAG Connection== | ==JTAG Connection== | ||
Revision as of 16:45, 8 July 2021
1 UART Connection
Any UART to USB adapter should work. We use an FT4232H adapter that is available from distributors for around 28€. You require a USB-A to USB-Mini-B cable to connect the FT4232H to your computer and 3 dupont cables to connect the FT4232H to the AXIOM Remote.
1.1 FT4232H Pinout
Chip Datasheet: https://ftdichip.com/wp-content/uploads/2020/08/DS_FT4232H.pdf
Mini Module Datasheet: https://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT4232H_Mini_Module.pdf
1.2 FT4232H Wiring UART
FT4232H features 4 UART ports, in this example we utilize port C. Under Linux the FT4232H should simply show up as ports /dev/ttyUSB0 to /dev/ttyUSB3 where port C from the above example would correspond to /dev/ttyUSB2.
Note that the Transmit (TXD) and Receive (RCD) lines need to be cross wired meaning TXD needs to be connected to RXD and RXD to TXD. You can choose any GND pin though.
| Name | FT4232H pin | Remote pin |
|---|---|---|
| GND | GND | GND |
| TXD | CD0 | RXD |
| RXD | CD1 | TXD |
2 JTAG Connection
| Name | Pin |
|---|---|
| GND | GND |
| VCC (optional) | 3V3 |
| TCK | AD0 |
| TDI | AD1 |
| TDO | AD2 |
| TMS | AD3 |
