Difference between revisions of "Beta CMV12K THT Sensor Board"

Revision as of 15:26, 18 December 2021

Note: For the development ZIF version of this sensor board see Beta CMV12K ZIF Sensor Board

Full size image

1 About

The CMV12000 THT (Through-hole technology) Sensor Board is using a special socket for hosting the CMV12000 image sensor. The sensor is installed during the assembly process and cannot be removed any more afterwards. If your application requires switching/swapping image sensors please consider the ZIF Sensor Board instead.

Full size image

2 Features

CMOS.
Global shutter.
APS-C / Super35.
Resolution: 12M (4096 x 3072).
320 Frames-per-second.
8,10 or 12bit Output.
Dynamic range: 10 stops (native), 15 stops with PLR.
Pixel size: 5.5µm.
Zero insertion force socket PCB version available

PCB Bottom.
PCB Top.

3 Revisions

Current:

AXIOM Beta Sensor CMV12000 THT V0.16

Archive:

AXIOM Beta Sensor CMV12000 v0.15

axiom beta sensor cmv12000 v0.14

AXIOM Beta Sensor CMV12000 THT v0.13

@@ Line 1: / Line 1: @@
-__NOTOC__
 '''Note:''' For the development ZIF version of this sensor board see [[Beta CMV12K ZIF Sensor Board]]
@@ Line 10: / Line 8: @@
 ==About==
-The CMV12000 THT (Through-hole technology) Sensor Board is suited to applications where the sensor-front-end won't be being removed on a regular basis. THT refers to a mounting scheme used for electronic components that involves the use of leads on components that are inserted into holes drilled into printed circuit boards (PCB) and soldered to pads on the opposite side either by manual assembly (hand placement) or by the use of automated insertion mount machines.
+The CMV12000 THT (Through-hole technology) Sensor Board is using a special socket for hosting the CMV12000 image sensor. The sensor is installed during the assembly process and cannot be removed any more afterwards. If your application requires switching/swapping image sensors please consider the [[Beta_CMV12K_ZIF_Sensor_Board|ZIF Sensor Board]] instead.