Difference between revisions of "AXIOM Beta/Firmware Flashing"
| Line 1: | Line 1: | ||
=Notes/Preparations= | |||
The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. | The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. | ||
To flash a new version of the firmware shut down the AXIOM Beta | To flash a new version of the firmware shut down the AXIOM Beta and take out the Micro SD card. | ||
We recommend to keep one original firmware image around so we suggest acquiring a new Micro SD card with at least 16GB. | We recommend to keep one original firmware image around so we suggest acquiring a new Micro SD card with at least 16GB. | ||
Note that if you flash new firmware onto a previously used Micro SD card all data on it will be overwritten, so if you have any files or changes to scripts/software on the AXIOM Beta make sure to first create a backup or copy your data/files somewhere else. | Note that if you flash new firmware onto a previously used Micro SD card all data on it will be overwritten, so if you have any files or changes to scripts/software on the AXIOM Beta make sure to first create a backup or copy your data/files somewhere else. | ||
Download Firmware 2.0 | Download the latest Firmware 2.0 from: https://github.com/apertus-open-source-cinema/axiom-firmware/releases | ||
==Method using Commandline== | |||
You need to first unpack the sd.dd.xz with the xz tool (or some other tool which can handle XZ data). | You need to first unpack the sd.dd.xz with the xz tool (or some other tool which can handle XZ data). | ||
| Line 14: | Line 16: | ||
<pre class="code">$ dd if=sd.dd of=/dev/sdx bs=128k status=progress</pre> | <pre class="code">$ dd if=sd.dd of=/dev/sdx bs=128k status=progress</pre> | ||
After flashing put the Micro SD card into the AXIOM Beta Microzed SD card slot and power up the Beta. | |||
==Method using Ether GUI== | |||
If yo prefer using a graphical user interface download and use: https://www.balena.io/etcher/ | |||
After flashing put the Micro SD card into the AXIOM Beta Microzed SD card slot and power up the Beta. | After flashing put the Micro SD card into the AXIOM Beta Microzed SD card slot and power up the Beta. | ||
=Firmware Backup= | |||
The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. To back up the entire firmware we plug the Micro SD card into a Linux PC and do the following: | The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. To back up the entire firmware we plug the Micro SD card into a Linux PC and do the following: | ||
Revision as of 17:23, 6 January 2022
1 Notes/Preparations
The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. To flash a new version of the firmware shut down the AXIOM Beta and take out the Micro SD card. We recommend to keep one original firmware image around so we suggest acquiring a new Micro SD card with at least 16GB. Note that if you flash new firmware onto a previously used Micro SD card all data on it will be overwritten, so if you have any files or changes to scripts/software on the AXIOM Beta make sure to first create a backup or copy your data/files somewhere else.
Download the latest Firmware 2.0 from: https://github.com/apertus-open-source-cinema/axiom-firmware/releases
1.1 Method using Commandline
You need to first unpack the sd.dd.xz with the xz tool (or some other tool which can handle XZ data).
$ xz -k -d sd.dd.xz
Then you need to write the sd.dd image to the SD card, for example like this (this assumes that /dev/sdx is the device for the new SD card).
$ dd if=sd.dd of=/dev/sdx bs=128k status=progress
After flashing put the Micro SD card into the AXIOM Beta Microzed SD card slot and power up the Beta.
1.2 Method using Ether GUI
If yo prefer using a graphical user interface download and use: https://www.balena.io/etcher/
After flashing put the Micro SD card into the AXIOM Beta Microzed SD card slot and power up the Beta.
2 Firmware Backup
The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. To back up the entire firmware we plug the Micro SD card into a Linux PC and do the following:
1. Find out which device the micro SD card is:
cat /proc/partitions
mount
... should give you a list of all connected devices. Let's assume in our case that the card is /dev/sdc
2. Make sure the card is unmounted (all 3 partitions):
umount /dev/sdc1 umount /dev/sdc2 umount /dev/sdc3
3. Clone the entire card to a file:
ddrescue /dev/sdc sdimage.img sdimage.log
For Mac and Windows see this guide: http://raspberrypi.stackexchange.com/questions/311/how-do-i-backup-my-raspberry-pi