Difference between revisions of "AXIOM Remote"
m |
m |
||
| Line 4: | Line 4: | ||
This application, and when released the associated hardware, is designed to be a comprehensive remote control unit for the AXIOM range of cameras - currently this is targeted at the Beta model. | This application, and when released the associated hardware, is designed to be a comprehensive remote control unit for the AXIOM range of cameras - currently this is targeted at the Beta model. | ||
The remote control software is made up of two separate components – the RemotePlus application which is designed to run on a purpose-designed, embedded (Raspberry Pi based), Linux hardware controller, but is also runnable on a Linux desktop/laptop for the purposes of development. | The remote control software is made up of two separate components – the [https://wiki.apertus.org/index.php/AXIOM_Remote_Plus RemotePlus] application which is designed to run on a purpose-designed, embedded (Raspberry Pi based), Linux hardware controller, but is also runnable on a Linux desktop/laptop for the purposes of development. | ||
To control the AXIOM camera a RemoteServer application is also required. Connectivity is over the USB UART interface between the AXIOM camera and the host – be it the hardware remote or a Linux desktop/laptop. | To control the AXIOM camera a RemoteServer application is also required. Connectivity is over the USB UART interface between the AXIOM camera and the host – be it the hardware remote or a Linux desktop/laptop. | ||
Revision as of 18:32, 24 February 2017
1 Project Overview
This application, and when released the associated hardware, is designed to be a comprehensive remote control unit for the AXIOM range of cameras - currently this is targeted at the Beta model.
The remote control software is made up of two separate components – the RemotePlus application which is designed to run on a purpose-designed, embedded (Raspberry Pi based), Linux hardware controller, but is also runnable on a Linux desktop/laptop for the purposes of development.
To control the AXIOM camera a RemoteServer application is also required. Connectivity is over the USB UART interface between the AXIOM camera and the host – be it the hardware remote or a Linux desktop/laptop.
As with all software & hardware that is pre-production the information contained on this page is subject to changes.
2 General Concept
File:AXIOM Remote V3 ButtonPos.pdf
Camera Docking Station:
3 Operation Concepts
4 Electronic Components
3.2" 320x240 pixel LCD + ILI9325 display controller
3D accelerometer to measure device orientation
4x AA battery tray
firmware stored on microsd card
PIC32 microprocessor
no internal RTC and no button cell -> RTC in Beta instead
ALPS SRBE210200 rotary + push switch