Difference between revisions of "AXIOM Remote"

Revision as of 14:52, 3 March 2017

This device, and when released the associated software, is designed to be a comprehensive remote control unit for the AXIOM range of cameras.

As with all software & hardware that is pre-production the information contained on this page is subject to changes.

Camera Docking Station:

3.2" 320x240 pixel LCD + ILI9325 display controller

3D accelerometer to measure device orientation

4x AA battery tray

firmware stored on microsd card

PIC32 microprocessor

no internal RTC and no button cell -> RTC in Beta instead

ALPS SRBE210200 rotary + push switch

@@ Line 2: / Line 2: @@
 == Project Overview==
-This application, and when released the associated hardware, is designed to be a comprehensive remote control unit for the AXIOM range of cameras - currently this is targeted at the Beta model.
+This device, and when released the associated software, is designed to be a comprehensive remote control unit for the AXIOM range of cameras.
-The remote control software is made up of two separate components – the [https://wiki.apertus.org/index.php/AXIOM_Remote_Plus RemotePlus] application which is designed to run on a purpose-designed, embedded (Raspberry Pi based), Linux hardware controller, but is also runnable on a Linux desktop/laptop for the purposes of development.
-To control the AXIOM camera a RemoteServer application is also required. Connectivity is over the USB UART interface between the AXIOM camera and the host – be it the hardware remote or a Linux desktop/laptop.
 As with all software & hardware that is pre-production the information contained on this page is subject to changes.
 ==General Concept==