Difference between revisions of "AXIOM Remote"

Revision as of 14:54, 14 July 2017

This device, and when released the associated software, is designed to be a comprehensive remote control unit for the AXIOM range of cameras.

As with all software & hardware that is pre-production the information contained on this page is subject to changes.

Camera Docking Station:

In consideration:

3D accelerometer to measure device orientation (optional)

4x AA battery tray

firmware stored on microSD card

no internal RTC and no button cell -> RTC in Beta instead

ALPS SRBE210200 rotary + push switch

SMT type rotary encoders:

Beta connectivity through Hirose HR10A-7P-4S (a bit expensive but massive) or alternatively 4 pin 2.5 or 3.5mm audio cables: 4-Poles-Jack-3-5-RCA-Connector-RCA-Audio-font-b-Plug-b-font-font-b.jpg plus metal receptor on Beta and Remote: https://www.amazon.de/sourcingmap-Kopfh%C3%B6rer-Interieur-Montage-Steckdose/dp/B014XJ1SN6

RS232C as Beta <-> Remote protocol

pick buttons, rotary encoders, etc components, collect datasheets and extract documentation about each components footprint and positions here

@@ Line 37: / Line 37: @@
 iphone 4 replacement display (326 PPI 3.5" 960×640 px) or http://www.ebay.com/itm/OEM-HTC-Droid-DNA-ADR6435-Original-LCD-Screen-Display-Repair-Replacement-Parts-/350711245261 smaller bezel )(documentation through: https://hackaday.io/project/364-mipi-dsi-display-shieldhdmi-adapter  ?)
-D accelerometer to measure device orientation
+D accelerometer to measure device orientation (optional)
 x AA battery tray
@@ Line 46: / Line 46: @@
 ALPS SRBE210200 rotary + push switch
+alternative:
+https://octopart.com/en12-hn22af18-bi+technologies-7730374
 SMT type rotary encoders: