Difference between revisions of "HDMI-Test"
From apertus wiki
| Line 1: | Line 1: | ||
# Format an SD card with one vfat partition (this is the default for the SD card that comes with the Zedboard) | # Format an SD card with one vfat partition (this is the default for the SD card that comes with the Zedboard) | ||
# Download http://vserver.13thfloor.at/Stuff/AXIOM/ALPHA/axiom_alpha_hdmi_test_v0.1.zip | # Download http://vserver.13thfloor.at/Stuff/AXIOM/ALPHA/axiom_alpha_hdmi_test_v0.1.zip and put the files in the zipped folder onto your SD card | ||
# Connect a monitor to the Zedboards HDMI port and turn on the monitor. | # Connect a monitor to the Zedboards HDMI port and turn on the monitor. | ||
# Shift all switches on the Zedboard down | # Shift all switches on the Zedboard down | ||
# Boot the Zedboard | # Boot the Zedboard | ||
# After booting is complete turn switch SW3 ( | # After booting is complete turn switch SW3 (fifth from the left) up | ||
==Notes== | ==Notes== | ||
Revision as of 17:00, 4 October 2013
- Format an SD card with one vfat partition (this is the default for the SD card that comes with the Zedboard)
- Download http://vserver.13thfloor.at/Stuff/AXIOM/ALPHA/axiom_alpha_hdmi_test_v0.1.zip and put the files in the zipped folder onto your SD card
- Connect a monitor to the Zedboards HDMI port and turn on the monitor.
- Shift all switches on the Zedboard down
- Boot the Zedboard
- After booting is complete turn switch SW3 (fifth from the left) up
Notes
If the Zedboard is booting via TFTP by default interrupt the bootloader and type:
env default -f saveenv
And reboot the Zedboard with the right pink pushbutton.