Difference between revisions of "ToDo"

From apertus wiki
Jump to: navigation, search
Line 7: Line 7:


Code: https://github.com/apertus-open-source-cinema/CMV12000_DNG_Writer
Code: https://github.com/apertus-open-source-cinema/CMV12000_DNG_Writer
==Linux C/C++ commandline tool to interpret all image sensor registers==
We require a c/c++ commandline tool that takes the 128x16bit sensor dump as stdin.
Displays the registers in a hex editor like way with addresses and content in a table and next to the table the human readable interpretation of the corresponding sensor parameters (exposure time, etc.)
Sensor Datasheet: https://github.com/apertus-open-source-cinema/alpha-hardware/raw/master/Datasheets/datasheet_CMV12000%20v8.pdf
Code: https://github.com/apertus-open-source-cinema/alpha-software/tree/master/misc_scripts_and_utilities/metadata-reader
Bash script example: [[Axiom_Alpha_Prototype#Reading_and_Writing_Sensor_Register]]
===Notes===
* The current memory mapping is 32bit aligned, so the 16bit SPI registers show up as 32bit where only 16bits are significant.
* To extract the last 128x16bit from a raw image file use:
cat file.raw16 | dd bs=256 skip=98304
Or if you have a raw16.xz compressed file you can do it all in one piped command (assuming the c/c++ tool is called "register_info"):
xzcat file.raw16.xz | dd bs=256 skip=98304 | register_info
* Sample files and format specifications of RAW16 can be found here: [[RAW16]]
==RAW image metadata reader==
All sensor registers are embedded into the raw16 image format.
Details about the file format: [[RAW16]]
Code: https://github.com/apertus-open-source-cinema/alpha-software/tree/master/misc_scripts_and_utilities/metadata-reader
==dead/hot pixel detection software==
A software that is supplied with a raw16 image and is able to detect dead/hot pixels and output all detected pixels positions.
https://github.com/apertus-open-source-cinema/alpha-software/tree/master/misc_scripts_and_utilities/hot_pixel_detection


==Flat-field correction generation software==
==Flat-field correction generation software==

Revision as of 12:21, 18 January 2014

1 Axiom Alpha Prototype

1.1 DNG Converter Software

  • Add other DNG tags such as dead pixels, register settings, black level calibration data, etc.
  • Implement the matrix as a LUT.
  • Eventually port to from python to C/C++

Code: https://github.com/apertus-open-source-cinema/CMV12000_DNG_Writer

1.2 Flat-field correction generation software

A software that is supplied with several (around 20 is sufficient) raw images of an out of focus 30% grey wall and is able to generate the sensitivity offset of each photosite and a resulting flat-field correction matrix (https://en.wikipedia.org/wiki/Flat-field_correction). The samples images are preferably done with a fast 50mm lens stopped down to F4-F5.6 facing an evenly lit surface (white wall with area at decent distance from wall light). To further smooth results the lens should be set to out-of-focus. We need to test if these measurements work even better with a lee filter in front of the sensor instead of a lens.

Retrieved from "https://wiki.apertus.org/index.php?title=ToDo&oldid=614"