Difference between revisions of "AXIOM Remote"
From apertus wiki
(→Status) |
|||
| Line 34: | Line 34: | ||
** [[AXIOM_Remote/Enclosures | Enclosures]] - TODO | ** [[AXIOM_Remote/Enclosures | Enclosures]] - TODO | ||
** [[AXIOM Remote/Software Installations]] - TODO | ** [[AXIOM Remote/Software Installations]] - TODO | ||
* [[AXIOM_Remote/ | * [[AXIOM_Remote/GUI |Graphical User Interface (GUI)]] | ||
* [[Parts]] | * [[Parts]] | ||
Revision as of 10:34, 3 February 2019
1 Status
November 2018
- Printed circuit boards for a first version prototype have been designed and populated.
- Haptic button options are being tested.
- PCB has been debugged.
- Enclosure prototypes have been 3D printed (first step towards ordering aluminium milled parts).
- UI design is ongoing but further software refinements are still required: https://lab.apertus.org/T1116 (please see this page's footer if you'd like too assist).
AXIOM Team Talk 14.3 (Oct 2018) covered AXIOM Remote development progress.
2 Overviews |
3 Technical |
4 Resources |
|
AXIOM Remote Concept Rendering 2018 - Note: Design is subject to change as improvements are made.