Difference between revisions of "AXIOM Beta Firmware Version 2.0"

Revision as of 19:32, 30 March 2019

Get a new Micro SD card (8GB should suffice, 16GB is fine as well)
Acquire the latest automatically built firmware image from: https://github.com/apertus-open-source-cinema/axiom-beta-firmware/releases
download, install and start Etcher: https://www.balena.io/etcher/
Flash the acquired image to a new Micro SD card with Etcher (we highly recommend not overwriting the Micro SD card you currently use in your AXIOM Beta)
After flashing put the Micro SD card into the AXIOM Beta Microzed Slot and power up the Beta

This new firmware is still in development so expect issues and bugs.

If you find a new bug please add it as github issue (please first check it has not been reported yet).

default user is now “operator” with pw: “axiom”
sudo is required to change system/camera settings as no password
Image build log is located in each image under: /var/build.log
devicetree is in: /boot/devicetree.dts
axiom-file-check.sh does an integrity check of /usr, /etc and /opt
binaries are linked in: /usr/axiom/bin
scripts are linked in: /usr/axiom/script
/opt/axiom-firmware contains scripts and binaries
every beta currently has the same MAC address - a random one should be generated on the first boot.

@@ Line 12: / Line 12: @@
 This is the list of current issues/bugs: https://github.com/apertus-open-source-cinema/axiom-beta-firmware/issues
-If you find a new bug please add it as github issue (please first check it has not been reported yet) .
+If you find a new bug please add it as github issue (please first check it has not been reported yet).
 * default user is now “operator” with pw: “axiom”