Difference between revisions of "Beta CMV12K ZIF Sensor Board"

Revision as of 00:28, 2 April 2020

Note: For the non-development THT version of this sensor board see Beta CMV12K THT Sensor Board

1 About

AXIOM Beta Developer Kits can be equipped with a CMV12000 ZIF (zero insertion force) socket sensor board. This is useful for developers as it allows for frequent, easy sensor removal at the turn of a lever (zero force). The CMV12000 sensor itself is a high sensitivity pipelined (read-out possible during exposure) global shutter CMOS image sensor enabling true correlated double sampling, driving and read-out programming over a serial peripheral interface and external exposure triggering via an internal timing generator.

Full size image.

2 Features

CMOS.
Global shutter.
APS-C / Super35.
Resolution: 12M (4096 x 3072).
320 Frames-per-second.
8,10 or 12bit Output.
Dynamic range: 10 stops (native), 15 stops with PLR.
Pixel size: 5.5µm.
Through Hole Technology PCB version available

Connectivity

Uses Socket 604 BGA see https://en.wikipedia.org/wiki/Socket_604

Power

The CMV12000 has a 4W continuous peak power consumption. There might be short higher peaks when training LVDS channels to initialize the sensor communication. For still images you can operate the sensor with largely reduced IO (number of LVDS lanes) which in turn should also reduce power consumption.

History

apertus° offered three different sensor options during the camera's crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors CMV12000 .

Note: The AXIOM Beta Compact hosts the Beta CMV12K THT Sensor Board. THT (Through-hole tech) is suited to applications where the sensor-front-end won't be removed regularly.

PCB Bottom with components.
PCB Top.
PCB Bottom.

3 Revisions

Current:

AXIOM Beta Sensor CMV12000 v0.18 ZIF R1.5

Archive:

@@ Line 30: / Line 30: @@
 * Pixel size: 5.5µm.
 * Through Hole Technology PCB version available
@@ Line 45: / Line 46: @@
 apertus° offered three different sensor options during the camera's crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the [[Image Sensors | ams Sensors CMV12000]] .
 '''Note:''' The [[AXIOM Beta]] Compact hosts the [[Beta CMV12K THT Sensor Board]]. THT (Through-hole tech) is suited to applications where the sensor-front-end won't be removed regularly.
@@ Line 55: / Line 58: @@
 Image:AXIOM_Beta_Sensor_ZIF_0.13_bottom.png| PCB Bottom.
 </gallery>
 ==Revisions==