OpenCine.Build Instructions
From apertus wiki
1 Prerequisites
Installation will be described in the OS related sections.
- Ubuntu / LinuxMint
- Qt 5.7 or 5.8
- Git
- CMake
- GCC / G++
- OpenGL headers (e.g. FreeGLUT3 dev package)
- FFMPEG dev libraries
2 Ubuntu
- Install required packages
- Command line: sudo apt-get install git cmake build-essential freeglut3-dev libavformat-dev libswscale-dev libavfilter-dev libavdevice-dev libavresample-dev
- Qt 5.8 (same aplpies to 5.7)
- It's assumed that user will download the file to /home/<user>/Downloads
- Download Qt installer from [[1]]
- Alternative terminal command: wget http://download.qt.io/official_releases/qt/5.8/5.8.0/qt-opensource-linux-x64-5.8.0.run
- Set type to executable: chmod +x qt-opensource-linux-x64-5.8.0.run
- Run installer: ./qt-opensource-linux-x64-5.8.0.run
- Click Next until path selection is shown, then select following path: /home/<user>/Qt (TODO: Add screenshot)
- Click Next, select x64 libraries and QtCreator, deactivate other options, as they are not required(TODO: Add screenshot)
- Start installation
- Afterwards you can proceed to the build from command line or in QtCreator
- Command line: Deactivate Launch QtCreator, click Finish -> #Build from command line
- QtCreator: Click Finish -> #Build in QtCreator
3 Build from command line
- Create folder to contain source and builds, should reside in home
- mkdir ~/OpenCine
- Clone repository, you can select between master and dev branches
- master is updated less often, but has usually stable code in it
- dev is updated often, but could contain broken code, in this case WIP text is added to commit description
- git clone --branch <branch name> --single-branch https://github.com/apertus-open-source-cinema/opencine.git $HOME/Source/OpenCine
- Change to Source folder
- Create a folder for the build, change to it
- mkdir OpenCine_build
- cd OpenCine_build
- Start CMake configuration, Qt path has to be supplied
- cmake -DCMAKE_PREFIX_PATH=$HOME/Qt/5.8/gcc_64/lib/cmake/ ../OpenCine
- Start the build, here we use 4 threads to accelerate it
- make -j4
- If the build succeeded, then executable files can be found in OpenCine_build/bin
4 Build in QtCreator
TODO