AXIOM Remote Plus

Current State: In development - development release - feedback and contributions appreciated

Documentation: https://github.com/Plus24Systems/Documentation

1 Remote Plus Overview

hfhfh

2 AXIOM Beta preparations

fiddling with devicetree is not required anymore

in /boot/uEnv.txt replace

console=ttyPS0,115200n8

with

console=dummy

Then on the Beta disable the service:

systemctl disable serial-getty@ttyPS0.service

and reboot the camera (be sure you did all the things to ensure access to the camera (fallbackIP, etc.) as described in the PDF before.

3 RemoteServer

Source Code: https://github.com/Plus24Systems/RemoteServer

3.1 Installation Notes

• acquire source code from github to AXIOM Beta
• compile in camera:

gcc RemoteServer.c -o RemoteServer -lpthread

4 RemotePlus GUI

Source Code: https://github.com/Plus24Systems/RemotePlus

4.1 Installation Notes

Ubuntu (tested with 16.04 LTS)

Required packages for compiling from source:

sudo apt-get install build-essential git

4.1.1 Install wxWidgets

get wxWidgets Development Release: 3.1.0 from: http://www.wxwidgets.org/downloads/ unpack and in the directory run:

./configure
make
sudo make install

this will take quite some time.

4.1.2 Install wiringPi

git clone git://git.drogon.net/wiringPi
cd wiringPi/
./build

4.1.3 Compile RemotePlus

Acquire source files:

git clone https://github.com/Plus24Systems/RemotePlus.git

Compile and Install:

make
sudo make install