AXIOM Remote
1 Project Overview
This device, and when released the associated software, is designed to be a comprehensive remote control unit for the AXIOM range of cameras.
As with all software & hardware that is pre-production the information contained on this page is subject to changes.
2 General Concept
File:AXIOM Remote V3 ButtonPos.pdf
Camera Docking Station:
3 Operation Concepts
4 Electronic Components
In consideration:
http://www.minidevs.com/product/CORE-A20.html hand soldered to our own PCB
iphone 4 replacement display (326 PPI 3.5" 960×640 px) (documentation through: https://hackaday.io/project/364-mipi-dsi-display-shieldhdmi-adapter ?)
3D accelerometer to measure device orientation
4x AA battery tray
firmware stored on microSD card
no internal RTC and no button cell -> RTC in Beta instead
ALPS SRBE210200 rotary + push switch
SMT type rotary encoders:
http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC05E/EC05E_list.html
http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC10E/EC10E_list.html
Beta connectivity through Hirose HR10A-7P-4S (a bit expensive but massive) or alternatively 4 pin 3.5 or 2.5mm audio cables: 
5 TODO, next steps
- pick buttons, rotary encoders, etc components, collect datasheets and extract documentation about each components footprint and positions here
- define connectivity to Beta (bandwidth, cable, connector)