Beta CMV12K ZIF Sensor Board

Note: For the non-development THT version of this sensor board see Beta CMV12K THT Sensor Board

1 About

AXIOM Beta Developer Kits can be equipped with a CMV12000 ZIF (zero insertion force) socket sensor board. This is useful for developers as it allows for frequent, easy sensor removal at the turn of a lever (zero force). The CMV12000 sensor itself is a high resolution global shutter CMOS image sensor.

Full size image.

2 Features

CMOS
global shutter
APS-C / Super35 diameter
12 Megapixels (4096 x 3072) resolution
320 frames per second (8bit), higher values at reduced resolution, lower values at higher bitdepth
8, 10 or 12bit output
10 stops (native), 15 stops with PLR HDR dynamic range
5.5µm pixel size:

Connectivity

Uses Socket 604 BGA see https://en.wikipedia.org/wiki/Socket_604

Datasheet: File:FOCCONN-PZ60403-013-T.PDF

Please note that the correct position for the CMV12000 to be inserted into the ZIF socket is the left most and top most position when looking straight at the ZIF socket (lever at the top). Any other position will not work and could potentially damage image sensor and camera hardware.

Power

The CMV12000 has a 4W continuous peak power consumption. There might be short higher peaks when training LVDS channels to initialize the sensor communication. For still images you can operate the sensor with largely reduced IO (number of LVDS lanes) which in turn should also reduce power consumption.

History

apertus° offered three different sensor options during the camera's crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors CMV12000 .

Note: The AXIOM Beta Compact hosts the Beta CMV12K THT Sensor Board. THT (Through-hole tech) is suited to applications where the sensor-front-end won't be removed regularly.

PCB Bottom with components.
PCB Top.
PCB Bottom.

3 Revisions

Current:

AXIOM Beta Sensor CMV12000 v0.18 ZIF R1.5

Archive: