RAW12

1 Raw16

1.1 Format Specifications

• no header, little endian, 16bit (12msb padded with 4lsb zeroes)
• starting at the top left, with 3072 rows of 4096 columns
• the data is in bayer pattern RG/GB
• image sensor registers dump (128 x 16bit, big endian) appended

1.2 Opening in Photoshop

• rename the file extension from ".raw16" to ".raw"

1.2.1 Samples

XZ compressed sample files (use 7Zip to uncompress under windows: http://www.7-zip.org/)

http://vserver.13thfloor.at/Stuff/AXIOM/ALPHA/RAW/

1.2.2 Metadata block

To display the metadata from a raw16 file:

cat image.raw16 | dd bs=256 skip=98304 | ./metadatareader 

The DNG converter expects the register block to be present so if it has not been saved with the image in camera:

To append an empty metadata block (sensor registers):

(cat old.raw16; dd if=/dev/zero bs=256 count=1) > new.raw16

To append an existing register block dumped into a file:

cat old.raw16 some.reg > new.raw16

2 RAW12

There is also the derived format that leaves out the 4 lsb zeros.

2.1 Samples

http://files.apertus.org/AXIOM-Beta/snapshots/

2.2 Conversion to RAW16

Convert RAW12 -> RAW16 with imagemagick:

convert -size 4096x3072 -depth 12 gray:input.raw12 -depth 16 gray:output.raw16

2.3 Conversion to DNG

Convert RAW12 -> DNG with raw2dng:

raw2dng file.raw12

Output will be file.DNG; width is assumed 4096, height is auto-detected from file size. For more options, run raw2dng without any arguments.

2.4 Metadata handling

Show metadata from a raw12 file (without converting it):

raw2dng file.raw12 --dump-regs