HDMI-Test

From apertus wiki
Revision as of 17:00, 4 October 2013 by Sebastian (talk | contribs)
Jump to: navigation, search
  1. Format an SD card with one vfat partition (this is the default for the SD card that comes with the Zedboard)
  2. Download http://vserver.13thfloor.at/Stuff/AXIOM/ALPHA/axiom_alpha_hdmi_test_v0.1.zip and put the files in the zipped folder onto your SD card
  3. Connect a monitor to the Zedboards HDMI port and turn on the monitor.
  4. Shift all switches on the Zedboard down
  5. Boot the Zedboard
  6. After booting is complete turn switch SW3 (fifth from the left) up

Notes

If the Zedboard is booting via TFTP by default interrupt the bootloader and type: 

env default -f
saveenv

And reboot the Zedboard with the right pink pushbutton.

Retrieved from "https://wiki.apertus.org/index.php?title=HDMI-Test&oldid=435"