Search results

Jump to: navigation, search

Page title matches

  • This page is for firmware 2.0. For firmware 1.0, check this page [[Factory Calibration]]. This page is assuming you have installed firmware 2.0 on a microSD card of '''at least 16GB''', in order to capture darkframe
    12 KB (1,834 words) - 15:44, 18 January 2024
  • The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. To flash a new version of the firmware shut down the AXIOM Beta and take out the Micro SD card.
    2 KB (390 words) - 11:17, 11 December 2023
  • ...t be alarmed by the name "Unstable Development Snapshot" it just means the firmware has been automatically built without human interaction. ...guide about firmware flashing/backup see: [[AXIOM_Beta/Firmware_Flashing | Firmware Flashing]]
    9 KB (1,382 words) - 12:29, 25 August 2023
  • My work involves advancing and extending the firmware of AXIOM Remote. During the GSoC coding period, I have been involved in the
    986 bytes (151 words) - 21:00, 25 August 2021
  • Moved to [[AXIOM Beta/Firmware]]
    32 bytes (5 words) - 10:38, 15 November 2017

Page text matches

  • This is a modified firmware and gateware to allow triggering image output over HDMI independent from tr * Migrate these scripts to Firmware 2.0
    618 bytes (92 words) - 11:08, 5 November 2023
  • The entire camera firmware is stored on a Micro SD card that's plugged into the Microzed. To flash a new version of the firmware shut down the AXIOM Beta and take out the Micro SD card.
    2 KB (390 words) - 11:17, 11 December 2023
  • Moved to [[AXIOM Beta/Firmware]]
    32 bytes (5 words) - 10:38, 15 November 2017
  • ...with UI is flashed on it and lastly to establish a connection between the firmware and the bootloader.
    1 KB (188 words) - 18:42, 25 August 2021
  • ...velopments with test made in Vivado HLS (High Level Synthesis) to speed up firmware development and modifications dramatically * Felix shared the news that the grant to work on gateware and firmware of an AXIOM Beta SDI 6G module has been officially approved
    823 bytes (128 words) - 17:28, 28 August 2017
  • === AXIOM Beta Firmware 1.0 === * '''Atomos Ninja BLADE''' (firmware version 5.2.)
    2 KB (293 words) - 18:20, 23 May 2020
  • * [[AXIOM Beta/AXIOM Beta Software/Firmware]]
    224 bytes (30 words) - 21:12, 4 November 2017
  • ...MicroZed (upload a special FPGA firmware) to program the PIC16s via ICSP (Firmware 2.0): <pre>$ sudo /opt/axiom-firmware/software/bringup-scripts/prep_icsp.sh</pre>
    4 KB (708 words) - 16:55, 19 September 2023
  • ==Firmware==
    3 KB (438 words) - 08:42, 7 June 2021
  • == Profiling the Beta firmware on QEMU == To access the monitor console while the Beta firmware is running, append this to the QEMU command line:
    5 KB (756 words) - 21:47, 4 July 2017
  • My work involves advancing and extending the firmware of AXIOM Remote. During the GSoC coding period, I have been involved in the
    986 bytes (151 words) - 21:00, 25 August 2021
  • ...Beta firmware by default currently. It might find its way into the default firmware in the future though. ...Beta Firmware Version 2.0]]. The following guide is legacy information for Firmware 1.0:
    5 KB (718 words) - 14:23, 19 July 2020
  • ...t be alarmed by the name "Unstable Development Snapshot" it just means the firmware has been automatically built without human interaction. ...guide about firmware flashing/backup see: [[AXIOM_Beta/Firmware_Flashing | Firmware Flashing]]
    9 KB (1,382 words) - 12:29, 25 August 2023
  • To read the current Firmware Version (hash) (only works in Firmware 2.0). [[AXIOM Beta Firmware Version 2.0]]
    4 KB (627 words) - 15:06, 14 May 2020
  • *[[AXIOM Remote: Firmware improvement and extension]]
    936 bytes (101 words) - 08:52, 28 August 2021
  • ===Steps to connect and flash AXIOM Remote Firmware with PICkit=== It is possible to flash the PIC32 firmware through '''pic32prog''' and '''FT2232H''' and '''FT4232H''' adapters (among
    10 KB (1,532 words) - 16:31, 12 August 2021
  • * 3) '''Automated firmware builds'''. ...amera remote control (dependencies: REST, camera control daemon, automated firmware builds so webserver can be pre-installed).
    3 KB (477 words) - 01:58, 9 April 2020
  • [[Category:Firmware]]
    1 KB (206 words) - 18:44, 4 December 2021
  • Firmware Open Source ...ed RAMPS boards from Reprap project is very common using a modified Marlin firmware.
    4 KB (554 words) - 16:26, 24 January 2017
  • * UI design is ongoing - C firmware prototype is now being ported to C++: https://lab.apertus.org/project/view/
    2 KB (266 words) - 08:49, 1 July 2021

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)