...power board design - we found three bugs :) - and created a bunch of test boards to simplify testing the individual parts and features). We expect to receiv
...r on ([[Beta CSO]]) module which is designed as 10DOF (degrees of freedom) sensor, well actually 11, because in addition to acceleration (3), orientation (3)
2 KB (287 words) - 20:04, 7 November 2017
==00-SB: Sensor Boards==
[[File:00-SBZ-001- AXIOM Beta CMV12000 ZIF Sensor Board V018R15 w Sensor Show 1150web.jpg | 1150px |]]
8 KB (1,233 words) - 12:33, 19 October 2020
...ly consist of one MicroZed ZYNQ board with two MachXO2 FPGAs and 4K camera sensor. The MicroZed is a FPGA-ARM hybrid processing board and it is the main boar
...aturing the Xilinx ZYNQ as SoC (System on Chip). The purple blue and green boards have been designed by us (includes the main board wich need a driver). The
6 KB (1,168 words) - 08:04, 20 June 2017
...https://wiki.apertus.org/index.php/Beta_CMV12K_ZIF_Sensor_Board CMV12K ZIF Sensor Board]
...https://wiki.apertus.org/index.php/Beta_CMV12K_THT_Sensor_Board CMV12K THT Sensor Board]
4 KB (553 words) - 18:35, 18 December 2021
AXIOM Beta [[Image Sensor Table]] - The community is keeping a log of which sensors are compatible wi
[https://www.magiclantern.fm/forum/ Magic Lantern] message boards.
2 KB (269 words) - 15:24, 5 March 2022
| style="width: 20%"| CMV12K ZIF Sensor Board
| style="width: 70%"| CMV12K THT Sensor Board
9 KB (1,197 words) - 18:54, 24 September 2019
** [[Sensor Calibration]]
** [[Image Sensor Table]]
4 KB (516 words) - 21:00, 17 May 2019
...y the foundations for a less costly (specifically by using a low-end image sensor), entry-level platform for software development purposes.
...been implemented using low-cost components. Naturally, with a budget image sensor, and when compared with the Micro's inspiration ([[AXIOM Beta]]), overall i
6 KB (920 words) - 21:45, 3 February 2022
...ip with enclosures and provide easy access to the camera’s printed circuit boards - With this in mind all associated design files, schematics, board layouts,
* Sensor cleaning kit
7 KB (1,008 words) - 09:06, 15 March 2021
...ted development as it provides easy access to the camera’s printed circuit boards. All associated design files, Schematics, Board layouts, BOMs, STEPs and so
Mavrx adapted the AXIOM Beta’s hardware design by rotating the image sensor 90º, shifting it to the edge of the PCB stack, then removing one of the PC
11 KB (1,678 words) - 17:39, 22 February 2021
=== Image Sensor Module (ISM)===
[[File:AXIOM-Gamma-Sensor-BoardPeltier.png|500px]]
9 KB (1,428 words) - 19:04, 14 May 2018
All Oshpark PCBs (all boards inside Beta beside Microzed) are FR408 (180Tg) with 1.64mm thickness.
...uote>it currently looks like you will be able to do that by separating the sensor module from the beta board :)</blockquote>
4 KB (711 words) - 12:06, 12 July 2015
...we agreed to make it far more powerful by devising a more complex stack of boards where each layer is dedicated to specific functions.”'' - Sebastian Piche
* CMV12000 image sensor.
21 KB (3,240 words) - 02:23, 9 April 2020
==Distance between Image Sensor and first PCB==
...' There are two versions of the Image Sensor Frontend with differing image sensor to PCB distances.
14 KB (2,357 words) - 14:58, 11 January 2024
'''Socket 1''': AXIOM Beta (with image sensor)<br />
'''Socket 1''': Partial Beta (without sensor)<br />
11 KB (1,766 words) - 10:46, 21 December 2020
===Initiate the Image Sensor===
The image sensor requires a link training at startup.
63 KB (9,865 words) - 08:05, 12 April 2024