Difference between revisions of "00-Printed Circuit Boards"

From apertus wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
__TOC__
__TOC__
'''Note:''' For [[AXIOM Beta]] camera structure see [[AXIOM_Beta/Manual#Hardware | Manual/Hardware]].


==00-SB: Sensor Boards==
==00-SB: Sensor Boards==
[[File:00-SBZ-001- AXIOM Beta CMV12000 ZIF Sensor Board V018R15 w Sensor Show 1150web.jpg    | 1150px |]]


The Beta CMV12K ZIF Sensor Board hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000.  
The Beta CMV12K ZIF Sensor Board hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000.  


<gallery mode="packed" heights="180">
 
Image:CMV12000 THT Sensor Board on e1e1e1.jpg  |[[ Beta CMV12K THT Sensor Board]]
BOMs and Schematics of all AXIOM Beta Sensor Boards - https://wiki.apertus.org/index.php/Beta_CMV12K_ZIF_Sensor_Board
Image:BetaSensorBoardZIF 0.18 1.jpg | [[Beta CMV12K ZIF Sensor Board]]
 
</gallery>
 
 
==00-DIB: Sensor Interface==
 
[[File:00-DIB-001- AXIOM Beta Dummy Interface Board V0.13R1.1 Top Populated Show 1150Web.jpg     | 1150px |]]
 
The AXIOM Beta Dummy Interface Board acts as a bridge between the image sensor board and the rest of the camera. It connects LVDS pairs from the camera's Main Board with the SFE (sensor front end). Capacitors to smooth-out power ripples and provide buffering have also been incorporated. It should be noted that this printed circuit board is extremely specific to the CMV12000 image sensor. A Smart Interface Board (in development), however, will allow almost any image sensor to be used with the camera.
 
 
BOMs and Schematics of all AXIOM Beta Sensor Interface Boards - https://wiki.apertus.org/index.php/Beta_Interface_Dummy_Board




==00-MB: Main Boards==
 
==00-MB: Main Board==


[[File:00-MB-001- AXIOM Beta Main Board V0.36R1.2 Bottom Populated 02 Show sm b.jpg  | 1150px |]]
[[File:00-MB-001- AXIOM Beta Main Board V0.36R1.2 Bottom Populated 02 Show sm b.jpg  | 1150px |]]
Line 22: Line 36:


BOMs and Schematics of all AXIOM Beta Main Boards - https://wiki.apertus.org/index.php/Beta_Main_Board
BOMs and Schematics of all AXIOM Beta Main Boards - https://wiki.apertus.org/index.php/Beta_Main_Board


==00-PB: Power Boards==
==00-PB: Power Boards==

Latest revision as of 12:33, 19 October 2020

Note: For AXIOM Beta camera structure see Manual/Hardware.

1 00-SB: Sensor Boards

00-SBZ-001- AXIOM Beta CMV12000 ZIF Sensor Board V018R15 w Sensor Show 1150web.jpg

The Beta CMV12K ZIF Sensor Board hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000.


BOMs and Schematics of all AXIOM Beta Sensor Boards - https://wiki.apertus.org/index.php/Beta_CMV12K_ZIF_Sensor_Board


2 00-DIB: Sensor Interface

00-DIB-001- AXIOM Beta Dummy Interface Board V0.13R1.1 Top Populated Show 1150Web.jpg

The AXIOM Beta Dummy Interface Board acts as a bridge between the image sensor board and the rest of the camera. It connects LVDS pairs from the camera's Main Board with the SFE (sensor front end). Capacitors to smooth-out power ripples and provide buffering have also been incorporated. It should be noted that this printed circuit board is extremely specific to the CMV12000 image sensor. A Smart Interface Board (in development), however, will allow almost any image sensor to be used with the camera.


BOMs and Schematics of all AXIOM Beta Sensor Interface Boards - https://wiki.apertus.org/index.php/Beta_Interface_Dummy_Board


3 00-MB: Main Board

00-MB-001- AXIOM Beta Main Board V0.36R1.2 Bottom Populated 02 Show sm b.jpg

Full size image


The Beta Main Board is the camera's equivalent of a PC's motherboard. It hosts two external medium-speed shield connectors and two high-speed plugin module slot connectors - These act as a central switch for defining where the data that's captured by the sensor and other interfaces gets routed to inside the hardware. In this regard, all specifics can be dynamically reconfigured in software.

BOMs and Schematics of all AXIOM Beta Main Boards - https://wiki.apertus.org/index.php/Beta_Main_Board


4 00-PB: Power Boards

00-PB-002- ABDK Power Board V0.30R1.0 Show.jpg


The AXIOM Beta Power Board PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software.

BOMs and Schematics of all AXIOM Beta Power Boards - https://wiki.apertus.org/index.php/Beta_Power_Board


5 00-SHDMI: HDMI Plugin Modules

ABCS-SHDMI-02c AXIOM Beta 1 x HDMI Plugin Module V0.7 R1.0 Top Populated Show sm.jpg

Full size image


This module provides one 1080p60 HDMI output stream via 4 LVDS channels directly from the Zynq on the Microzed.

BOMs and Schematics of all AXIOM Beta HDMI Plugin Modules - https://wiki.apertus.org/index.php/Beta_HDMI_Plugin_Module



6 00-SUSB: USB 3.0 Plugin Modules

00-SUSB-001- AXIOM Beta 1 x USB 3.0 Plugin Module V0.2 R1.0 Top Populated Show sm.jpg

Full size image


With the USB 3.0 plugin module, any computer with USB 3.0 connectivity can be used as an AXIOM Recorder. This allow for defining format/container/metadata/etc. of uncompressed raw 4k footage.

BOMs and Schematics of all AXIOM Beta HDMI Plugin Modules - https://wiki.apertus.org/index.php/1x_USB_3.0_Plugin_Module



7 00-DS: AXIOM Beta Debug Shields

00-DS-001- AXIOM Beta Debug Shield V0.1R1.0 Show sm.jpg

Full size image


The AXIOM Beta has 2 medium speed IO interfaces to be used with "shields".

BOMs and Schematics of all AXIOM Beta Debug Shields - https://wiki.apertus.org/index.php/Beta_Debug_Shield



8 00-SPMOD: AXIOM Beta Single PMOD Plugin Module

00-SPMOD-001- AXIOM Beta Single PMOD Plugin Module V0.1R1.0 Show sm.png

Full size image


The Beta 1x PMOD Plugin Module features PMOD debug inputs/outputs for connecting a wide range of external PMOD devices - mainly intended for development and testing when general purpose Input/Output (GPIO) is required.


BOMs and Schematics of all AXIOM Beta Single PMOD Plugin Modules- https://wiki.apertus.org/index.php/Beta_1x_PMOD_Plugin_Module



9 00-CSO: AXIOM Beta Centre-Solder-On Module

00-CSO-001- AXIOM Beta CSO V0.1R1.0 Show sm.jpg

Full size image


Some of the floor space in the centre of the AXIOM Beta Main Board has been left clear so that a CSO (centre-solder-on) board can be incorporated. This will host chips capable of measuring and controlling compensation processes via the camera's software, i.e. for orientation and acceleration (the same chips used to stabilise quadcopters and track movement in VR headsets), magnetic field related data, and three dimensional motion sensing.


BOMs and Schematics of all AXIOM Beta CSOs- https://wiki.apertus.org/index.php/Beta_CSO



10 00-PA: AXIOM Beta Power Adapter Board

00-PA-001- AXIOM Beta Power Adapter Board V0.2R1.1 Show sm.png

Full size image.


BOMs and Schematics of all AXIOM Beta Power Adapter Boards- https://wiki.apertus.org/index.php/Beta_Power_Adapter_Board



11 00-DSDI: AXIOM-Photon-SDI

00-DSDI-001- AXIOM-Photon-SDI R1.0 Top Populated Show sm.jpg

Full size image.


The AXIOM photonSDI hardware is an extension board for the apertusº AXIOM Beta open source camera that adds 6G SDI connectivity to its features.

The board has two independent 6G SDI outputs that can both output the same image, different images, or be used in a dual 6G configuration that allows the transmission of 4k video material at 60 frames per second. Additionally the board contains a 6G SDI input for synchronisation and blending and a legacy synchronisation input.


BOMs and Schematics of all AXIOM-Photon-SDI Boards - https://wiki.apertus.org/index.php/SDI_Plugin_Module


12 00-DSAT: AXIOM Beta Dual SATA Plugin Module Prototype

00-DSAT-001- AXIOM Beta Dual SATA Plugin Module V0.6 R1.0 Top Populated Show sm.jpg

Full size image.






  • 00-SB-002-0V16-1R3c
  • 00-SB-003-1V2-1R2
  • 00-SiB-001-0V12-1R0
  • 00-TPMOD-001-1V2-1R0
  • 00-TPMOD-002-1V2-1R1
  • 00-PMODD-001-1V0