00-Printed Circuit Boards

1 00-SB: Sensor Boards

The Beta CMV12K ZIF Sensor Board hosts the heart of every cinema camera - the (CMOS) image sensor. apertus° offered three different sensor options during the crowd funding campaign; Super35, Super16 and 4/3rds, and as almost 90% of the backers opted for the Super35 sensor its respective module was developed first. The camera uses the ams Sensors Belgium CMV12000.

CMV12000 THT Sensor Board
BetaSensorBoardZIF V0.18R1 PCB Top with components and CMV12000

2 00-PB: Power Boards

The AXIOM Beta Power Board PCB generates all the different supply voltages for the chips and logic on the other PCB’s inside the camera. It also monitors currents so that it can estimate remaining power based on the recorded consumption. In the current revision of the camera a predefined set of supply voltages matching the current application with the rest of the camera have been generated, in the future however, it will be possible for users to dynamically reconfigure voltages according to their needs through the camera’s software.

BOMs and Schematics of all AXIOM Beta Power Boards - https://wiki.apertus.org/index.php/Beta_Power_Board

2.1 00-SB-001-0V16-1R2c

00-SB-002-0V16-1R3c
00-SB-003-1V2-1R2
00-SiB-001-0V12-1R0
00-DS-001-0V1-1R0
00-MB-001-0V36-1R2
00-CSO-001-
00-PB-001-0V29
00-PB-002-0V30
00-PB-003-0V35
00-SPMOD-001-0V1-1R0
00-SPMOD-002-0V1-1R1
00-TPMOD-001-1V2-1R0
00-TPMOD-002-1V2-1R1
00-SHDMI-001-0V2
00-SHDMI-002-0V4
00-SHDMI-003-0V5
00-SHDMI-004-0V6
00-SHDMI-005-0V8-1R2
00-PMODD-001-1V0