Difference between revisions of "AES-Z7MB-7Z020-SOM-G"

From apertus wiki
Jump to: navigation, search
m
m
Line 1: Line 1:
[[File:MIcroZed Front.jpg | 500px| thumb | 550px]]
[[File:MIcroZed Front.jpg | 500px| thumb | 550px]]
[http://zedboard.org/product/microzed MicroZed™] is a low-cost development board based on the [http://www.xilinx.com/products/silicon-devices/soc/zynq-7000.html Xilinx Zynq®-7000] All Programmable SoC. Its unique design allows it to be used as both a stand-alone evaluation board for basic SoC experimentation, or combined with a carrier card as an embeddable system-on-module (SOM). MicroZed contains two I/O headers that provide connection to two I/O banks on the programmable logic (PL) side of the Zynq®-7000 All Programmable SoC device. In stand-alone mode, these 100 PL I/O are inactive. When plugged into a carrier card, the I/O are accessible in a manner defined by the carrier card design.


There is nothing which makes the Zynq specifically suited for high bandwidth or camera applications etc. What makes it special is the combination of a microcontroller (hardened arm cores) and FPGA fabric. For us, the main reason to go with the Zynq was the availability of the MicroZed for a reasonable price.
There is nothing which makes the Zynq specifically suited for high bandwidth or camera applications etc. What makes it special is the combination of a microcontroller (hardened arm cores) and FPGA fabric. For us, the main reason to go with the Zynq was the availability of the MicroZed for a reasonable price.
Line 18: Line 20:
----
----


 
[[File:MicroZed Rear.jpg | 500px| thumb | 550px]]
==Cooling==
==Cooling==



Revision as of 17:35, 7 November 2017

MIcroZed Front.jpg

MicroZed™ is a low-cost development board based on the Xilinx Zynq®-7000 All Programmable SoC. Its unique design allows it to be used as both a stand-alone evaluation board for basic SoC experimentation, or combined with a carrier card as an embeddable system-on-module (SOM). MicroZed contains two I/O headers that provide connection to two I/O banks on the programmable logic (PL) side of the Zynq®-7000 All Programmable SoC device. In stand-alone mode, these 100 PL I/O are inactive. When plugged into a carrier card, the I/O are accessible in a manner defined by the carrier card design.

There is nothing which makes the Zynq specifically suited for high bandwidth or camera applications etc. What makes it special is the combination of a microcontroller (hardened arm cores) and FPGA fabric. For us, the main reason to go with the Zynq was the availability of the MicroZed for a reasonable price.

Note: If we would have built our own 'MicroZed' (which we'll probably do one day) it probably wouldn't use a Zynq.




1 Documentation, Schematics, BOM, etc.

http://zedboard.org/support/documentation/1519

Datasheet



MicroZed Rear.jpg

2 Cooling

Custom CNC milled heatsink: https://github.com/apertus-open-source-cinema/beta-hardware/tree/master/Microzed-Heatsink

Fonsoning FSY31S05M 30x30x10mm 5V 0.12A fan