Difference between revisions of "AXIOM Beta/AXIOM Beta Software"

From apertus wiki
Jump to: navigation, search
Line 34: Line 34:
  sshpass -p 'beta' ssh root@*BETA-IP* "./cmv_snap3 -e 10ms" | tee snap.raw16 | display -size 4096x3072 -depth 16 gray:-
  sshpass -p 'beta' ssh root@*BETA-IP* "./cmv_snap3 -e 10ms" | tee snap.raw16 | display -size 4096x3072 -depth 16 gray:-


==Addititonal information==
Display voltages and current flow:
./pac1720_info.sh
Output:
<nowiki>ZED_5V        5.0781 V [2080] +29.0625 mV [2e8]  +968.75 mA
BETA_5V      5.1172 V [20c0] +26.6016 mV [2a9]  +886.72 mA
HDN          3.2422 V [14c0] -0.0391 mV [fff]    -1.30 mA
PCIE_N_V      3.2422 V [14c0] -0.0391 mV [fff]    -1.30 mA
HDS          3.2422 V [14c0] +0.0000 mV [000]    +0.00 mA
PCIE_S_V      3.2422 V [14c0] -0.0391 mV [fff]    -1.30 mA
RFW_V        3.2812 V [1500] +0.2734 mV [007]    +9.11 mA
IOW_V        3.2422 V [14c0] +0.0000 mV [000]    +0.00 mA
RFE_V        3.2812 V [1500] +0.2344 mV [006]    +7.81 mA
IOE_V        3.2812 V [1500] +0.0781 mV [002]    +2.60 mA
VCCO_35      2.5000 V [1000] +0.6641 mV [011]    +22.14 mA
VCCO_13      2.4609 V [ fc0] +1.2500 mV [020]    +41.67 mA
PCIE_IO      2.4609 V [ fc0] -0.0391 mV [fff]    -1.30 mA
VCCO_34      2.4609 V [ fc0] +0.8203 mV [015]    +27.34 mA
W_VW          1.9922 V [ cc0] -0.0781 mV [ffe]    -2.60 mA
N_VW          3.1641 V [1440] +0.0000 mV [000]    +0.00 mA
N_VN          1.8750 V [ c00] +15.4297 mV [18b]  +514.32 mA
N_VE          3.1641 V [1440] +0.0000 mV [000]    +0.00 mA
E_VE          1.9922 V [ cc0] -0.0391 mV [fff]    -1.30 mA
S_VE          1.9531 V [ c80] +0.0000 mV [000]    +0.00 mA
S_VS          2.9297 V [12c0] +0.3906 mV [00a]    +13.02 mA
S_VW          1.9922 V [ cc0] -0.1562 mV [ffc]    -5.21 mA
</nowiki>
Read Temperature on Zynq:
./zynq_info.sh
Output:
ZYNQ Temp    49.9545 °C
=General Info=
==Operating System==
==Operating System==



Revision as of 12:57, 15 September 2015

1 Getting Started

1.1 Connectivity

  1. Connect USB UART on the Microzed (Red PCB) to a PC - not the Micro-USB on the Powerboard (that's the JTAG Interface)
  2. Connect Ethernet
  3. Apply Power

Default account:

user: root
password: beta

The Beta requests an IP via DHCP by default.

Over the Serial Console (USB UART) you can set the IP manually if DHCP is not an option:

ifconfig eth0 192.168.0.9 up # use any IP you want

1.2 Setup

Run the init script

./kick.sh

This will initialize all systems and train the sensor communication.

1.3 Capture an image

write the image into file: snap.raw16 plus display it with imagemagick:

ssh root@*BETA-IP* "./cmv_snap3 -e 10ms" | tee snap.raw16 | display -size 4096x3072 -depth 16 gray:-


Install sshpass so you don't need to type the password every time we snap an image:

sudo apt-get install sshpass

Use:

sshpass -p 'beta' ssh root@*BETA-IP* "./cmv_snap3 -e 10ms" | tee snap.raw16 | display -size 4096x3072 -depth 16 gray:-

1.4 Addititonal information

Display voltages and current flow:

./pac1720_info.sh

Output:

ZED_5V        	5.0781 V [2080] 	+29.0625 mV [2e8]   +968.75 mA
BETA_5V       	5.1172 V [20c0] 	+26.6016 mV [2a9]   +886.72 mA
HDN           	3.2422 V [14c0] 	 -0.0391 mV [fff]     -1.30 mA
PCIE_N_V      	3.2422 V [14c0] 	 -0.0391 mV [fff]     -1.30 mA
HDS           	3.2422 V [14c0] 	 +0.0000 mV [000]     +0.00 mA
PCIE_S_V      	3.2422 V [14c0] 	 -0.0391 mV [fff]     -1.30 mA
RFW_V         	3.2812 V [1500] 	 +0.2734 mV [007]     +9.11 mA
IOW_V         	3.2422 V [14c0] 	 +0.0000 mV [000]     +0.00 mA
RFE_V         	3.2812 V [1500] 	 +0.2344 mV [006]     +7.81 mA
IOE_V         	3.2812 V [1500] 	 +0.0781 mV [002]     +2.60 mA
VCCO_35       	2.5000 V [1000] 	 +0.6641 mV [011]    +22.14 mA
VCCO_13       	2.4609 V [ fc0] 	 +1.2500 mV [020]    +41.67 mA
PCIE_IO       	2.4609 V [ fc0] 	 -0.0391 mV [fff]     -1.30 mA
VCCO_34       	2.4609 V [ fc0] 	 +0.8203 mV [015]    +27.34 mA
W_VW          	1.9922 V [ cc0] 	 -0.0781 mV [ffe]     -2.60 mA
N_VW          	3.1641 V [1440] 	 +0.0000 mV [000]     +0.00 mA
N_VN          	1.8750 V [ c00] 	+15.4297 mV [18b]   +514.32 mA
N_VE          	3.1641 V [1440] 	 +0.0000 mV [000]     +0.00 mA
E_VE          	1.9922 V [ cc0] 	 -0.0391 mV [fff]     -1.30 mA
S_VE          	1.9531 V [ c80] 	 +0.0000 mV [000]     +0.00 mA
S_VS          	2.9297 V [12c0] 	 +0.3906 mV [00a]    +13.02 mA
S_VW          	1.9922 V [ cc0] 	 -0.1562 mV [ffc]     -5.21 mA

Read Temperature on Zynq:

./zynq_info.sh 

Output:

ZYNQ Temp     	49.9545 °C

2 General Info

2.1 Operating System

At this moment we were able to reuse an Arch Linux image for the Zedboard on the Microzed. To do so, some software such as the FSBL and uboot were added. More information can be found here: http://stefan.konink.de/contrib/apertus/ I will commit myself on the production of a screencast of the entire bootstrap proces from the Xilinx software to booting the MicroZed.

I would suggest running Arch Linux on the AXIOM Beta for development purposes. If we need to shrink it down that will be quite trivial. Obviously we can take the embedded approach from there, as long as we don't fall in the trap of libc implementations with broken threading.


2.2 Userspace

Arch Linux comes with systemd, which has one advantage that the boot process is incredible fast. Standard tools such as sshd and dhcpcd have been preinstalled. We may need other tools such as ftp, webserver, etc.

  • ftp; I would suggest vsftpd here
  • webserver; I am able to modify cherokee with custom C code to directly talk to specific camera sections. Cherokee already powers the WiFi module of the GoPro.

One idea to store camera relevant parameters inside the camera and provide access from most programming languages is to use a database like http://en.wikipedia.org/wiki/Berkeley_DB