Difference between revisions of "AXIOM Beta/Enclosures"

From apertus wiki
Jump to: navigation, search
m
Line 25: Line 25:


Note: There may be scope for improvement by making the case slightly bigger (few mm wider for the front and back side), so that the HDMI cable can fit nicely in the enclosure (and you don't need to shave some plastic off the cable). If you make any alterations please update this page with modifications accordingly.
Note: There may be scope for improvement by making the case slightly bigger (few mm wider for the front and back side), so that the HDMI cable can fit nicely in the enclosure (and you don't need to shave some plastic off the cable). If you make any alterations please update this page with modifications accordingly.
----
There is a current ongoing effort around redesigning the transparent enclosure as to feature a hole and mount for a 60x60x10mm cooler fan on the top plate (face of the transparent enclosure) and a chimney on the back plate, directly over the heatsink on top of the Zynq chip of the Zedboard - all this for improved thermal performance when using this enclosure.
The design needs to be rewritten (latest source did not save properly, losing the layers and compiling the SVG information into image information inside the SVG), but in the meantime the following sources can be used for achieving the same effect:


====Distance between Image Sensor and first PCB====
====Distance between Image Sensor and first PCB====

Revision as of 09:06, 7 July 2018

1 Simple Enclosure

The Simple Enclosure is meant to wrap a "skin" around the camera's electronics and CNC milled metal skeleton parts. The Simple Enclosure is designed in a way that can be produced with any consumer 3d printer. The design is not finished yet, please help finish and test it.

https://cad.onshape.com/documents/15b58e5500d917fd327e95ef/w/7ed95a699b599a370a7f55ff/e/f97fa229ef96cd1e6d0c4a40

Photo credit: Maxime Fuhrer, AXIOM Belgique.




2 Transparent Enclosure

A transparent enclosure is useful for showcasing the camera's printed circuit boards and for allowing to understand quickly what may or may not be going on simply by looking at the camera's status LEDs. The design is made so it can be laser cut with a 3mm thick acrylic glass. Acrylic glass comes is many variations and colors and could also be used to print logos or text labels on the exterior.


Simple transparent enclosure for the AXIOM Beta, version 0.2.

Beta-simple-transparent-enclosure v0.2.svg

Key : Black => to be cut ; Red => to be engraved ; Green => comments (not to be cut or engraved)

Open and edit the above image with Inkscape or similar.

Note: There may be scope for improvement by making the case slightly bigger (few mm wider for the front and back side), so that the HDMI cable can fit nicely in the enclosure (and you don't need to shave some plastic off the cable). If you make any alterations please update this page with modifications accordingly.


There is a current ongoing effort around redesigning the transparent enclosure as to feature a hole and mount for a 60x60x10mm cooler fan on the top plate (face of the transparent enclosure) and a chimney on the back plate, directly over the heatsink on top of the Zynq chip of the Zedboard - all this for improved thermal performance when using this enclosure.

The design needs to be rewritten (latest source did not save properly, losing the layers and compiling the SVG information into image information inside the SVG), but in the meantime the following sources can be used for achieving the same effect:




2.1 Distance between Image Sensor and first PCB

Note that there are two versions of the Image Sensor Frontend with different image sensor to PCB distances. The transparent enclosure has been designed for the ZIF (CPU Socket) variant of the Sensor Frontend.

Axiom-beta-image-sensor-distances.png

2.2 Heat Dissipation

Tests have shown that this transparent enclosure makes the Zynq on the microzed prone to overheating (due to the lack of air circulation) which creates general erratic camera behavior. Other parts in the camera can get too hot as well of course. A newer design with a larger fan on top of the enclosure has shown significant improvements to keeping the Zynq on a constant temperature.

"Case" is the above laser cut transparent enclosure
"Open" refers to the developer kit without enclosure
"Chimney" an intermediate design improvement attempt
"2xFan" a further improved design with a smaller fan on the microzed and a big fan at the top of the PCB stack
"final" the final improved design with a big fan at the top of the PCB stack but no fan on the microzed heatsink

Case power.png Case sensor.png Case ddr.png Case zynq.png

3 AXIOM Beta Compact Enclosure

To be CNC milled from aluminum, ceramic coated or anodized

Design still in progress - not finished yet.

All dimensions are in millimeter.

Labels/logos will be pad printed.

AXIOM-Beta-Full-Enclosure-Main-for-Drawing-Drawing-1.png

Onshape 3D CAD: https://cad.onshape.com/documents/73226709ded01ea10250d8e1/w/f6bfcb79ea86c0939ee114ee/e/e7581285bfd3e966f937c5dd

Open Todos:

  • Draw holes for Emount bayonet ring screws
  • Where to place image sensor plane knob and label

3.1 E mount FFD verification

AXIOM-Beta-conpact-FFD-path-V01.jpg



3.2 IR/UV Cut-off Filter

The visible spectrum that humans can see ranges from 380 - 750 nm.

Currently we are shipping Dev Kits with Haida Pro II MC Digital Slim UV / IR 390nm / 750nm filters.

Hoya filters offer a narrower band of 390 nm - 700 nm - will need to be tested how it impacts less red tones.

http://www.optics-online.com/IRC.asp?PN=IRC30-50x50 50x50mm for 39$ for sample (volume pricing likely lower and on request), 1.5mm thickness

UQG Optics offer 40x40x1.1mm UV/IR Cut off filters with 400 - 690nm bandpass




3.3 Thread Inserts

We want to use thread inserts instead of cutting threads into the aluminum ( -> stronger, less production steps, easier to replace thread insert when damaged later):


Ensat from Kerb Konus seems very suitable: http://www.kerbkonus.de/proddb/assistent.php?lang=en&a=presel_ds&ds=30

UNC 1/4-20 Ensat SB: http://kerbkonus.de/proddb/tecsheet.php?itemno=307000525160&status=ensat-sb&ds=20&gewinde=525&lang=en&pgc=3070

UNC 3/8-16 Ensat SB: http://kerbkonus.de/proddb/tecsheet.php?itemno=307000637100&status=ensat-sb&ds=20&gewinde=637&lang=en&pgc=3070


UNC 1/4-20 ~ 1€ / pcs (excl. taxes)

UNC 3/8-16 ~ 2.50€ / pcs (excl. taxes)

M3x6 ~ 0.44€ / pcs (excl. taxes)

M4x8 ~ 0.55€ / pcs (excl. taxes)

M5x10 ~ 0.60€ / pcs (excl. taxes)




4 Enclosures and Temperatures

In a closed case it's all about the air flow, so you need to carefully consider where the air enters and leaves the case. Ventilating out through holes above the fan is recommended. It's best to make a sort of wind-tunnel effect if you like. If you simply put a few 'holes' at the back and have a gap between fan and case, the hot air will mostly circulate inside the case, which is not what you want.

It's also recommended to measure various temperatures on the camera and monitor them during use with and without case.

./zynq_info.sh 

... will give you the zynq temp,


cat /sys/class/hwmon/hwmon0/temp[0-9]_input 

... will give you power board temp


cmv_reg 127 

... will give the temperature of the sensor.


The zynq will work relatively fine up to 90°C, although that is a little high for normal use. For the sensor you want to keep temperature quite low - typically not more than a few degrees above room temperature, so adding holes or slits close to the sensor is a good idea.

Always keep in-take holes/slits at the bottom or at least bottom side, because it aids natural convection. As a rule of the thumb, for intake you want to have about 1.5-2x the area you have for the exhaust (in total, which is the inside area of the fan). If you have too little intake, the fan gets slowed down, if you have to much, cooling will be ineffective.




5 General Enclosure Design Topics

From Labs:

Weatherproof Enclosure

Axiom Beta new enclosure and labeling

Select Enclosure Feet

AXIOM Beta Workboard




6 Legacy

Body Design Options

Cooling

Switchable ND Filters not planned currently