AXIOM Remote

From apertus wiki
Jump to: navigation, search

1 Project Overview

This device, and when released the associated software, is designed to be a comprehensive remote control unit for the AXIOM range of cameras.

As with all software & hardware that is pre-production the information contained on this page is subject to changes.

2 General Concept

File:AXIOM Remote V3 ButtonPos.pdf

AXIOM Remote- Layout.png

Remote-Concept-Aspect-01.jpg

Camera Docking Station:

SlideIn.jpg

RemotePinout.jpg

ClipInOin.jpg RemoteReleaseSwitchjpg.jpg

SpringRelease.jpg SpringRelease2.jpg


3 Operation Concepts

MenuConcept-01.jpg

4 Electronic Components

In consideration:

3.2" 320x240 pixel LCD + ILI9325 display controller

3D accelerometer to measure device orientation

4x AA battery tray

firmware stored on microSD card

PIC32 microprocessor

no internal RTC and no button cell -> RTC in Beta instead

ALPS SRBE210200 rotary + push switch

SMT type rotary encoders:

http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC05E/EC05E_list.html

http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC10E/EC10E_list.html

TODO, next steps: pick buttons, rotary encoders, etc components, collect datasheets and extract documentation about each components footprint and positions here.