AXIOM Remote

From apertus wiki
Jump to: navigation, search

1 Project Overview

This device, and when released the associated software, is designed to be a comprehensive remote control unit for the AXIOM range of cameras.

As with all software & hardware that is pre-production the information contained on this page is subject to changes.

2 General Concept

File:AXIOM Remote V3 ButtonPos.pdf

AXIOM Remote- Layout.png

Remote-Concept-Aspect-01.jpg

Camera Docking Station:

SlideIn.jpg

RemotePinout.jpg

ClipInOin.jpg RemoteReleaseSwitchjpg.jpg

SpringRelease.jpg SpringRelease2.jpg


3 Operation Concepts

MenuConcept-01.jpg

4 Electronic Components

In consideration:

http://www.minidevs.com/product/CORE-A20.html hand soldered to our own PCB

iphone 4 replacement display (326 PPI 3.5" 960×640 px) (documentation through: https://hackaday.io/project/364-mipi-dsi-display-shieldhdmi-adapter  ?)

3D accelerometer to measure device orientation

4x AA battery tray

firmware stored on microSD card

no internal RTC and no button cell -> RTC in Beta instead

ALPS SRBE210200 rotary + push switch

SMT type rotary encoders:

http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC05E/EC05E_list.html

http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC10E/EC10E_list.html

Beta connectivity through Hirose HR10A-7P-4S (a bit expensive but massive) or alternatively 4 pin 2.5 or 3.5mm audio cables: 4-Poles-Jack-3-5-RCA-Connector-RCA-Audio-font-b-Plug-b-font-font-b.jpg plus metal receptor on Beta and Remote: https://www.amazon.de/sourcingmap-Kopfh%C3%B6rer-Interieur-Montage-Steckdose/dp/B014XJ1SN6

RS232C as Beta <-> Remote protocol

5 TODO, next steps

  1. pick buttons, rotary encoders, etc components, collect datasheets and extract documentation about each components footprint and positions here