Difference between revisions of "Beta Interface Dummy Board"

From apertus wiki
Jump to: navigation, search
m
m
Line 1: Line 1:
[[File:BetaDummyBoard 0.12 TOP.jpg | thumb | 500px | PCB Top with components]]
[[File:BetaDummyBoard 0.12 TOP.jpg | thumb | 500px | PCB Top with components]]
[[File:BetaDummyBoard 0.12 BOTTOM.jpg | thumb | 500px | PCB Bottom with components]]
=About=
=About=


Line 7: Line 8:


<gallery mode="packed" heights="180">
<gallery mode="packed" heights="180">
Image:BetaDummyBoard 0.12 BOTTOM.jpg| PCB Top.
Image:Beta_CMV_Dummy_Interface_v0.9_r1.1-top.png| PCB Top.
Image:Beta_CMV_Dummy_Interface_v0.9_r1.1-top.png| PCB Top.
Image:Beta_CMV_Dummy_Interface_v0.9_r1.1-bottom.png| PCB Bottom.
Image:Beta_CMV_Dummy_Interface_v0.9_r1.1-bottom.png| PCB Bottom.

Revision as of 15:57, 16 January 2018

PCB Top with components
PCB Bottom with components

1 About

The Beta Interface Dummy Board acts as a bridge between the image sensor board and the rest of the camera. It converts communication between the aforementioned components to a standard protocol so that almost any image sensor that becomes available in the future can be used with the AXIOM Beta without changing the rest of the hardware. If AXIOM users felt that 8K was in demand they would simply swap the sensor board for one capable of capturing images in the desired resolution.

Note: The present iteration of Interface Board limits image sensor throughput to 150FPS@4K (faster Interface Board replacement will be available later).


2 Revisions

axiom beta interface dummy v0.13

axiom beta interface dummy v0.9