Difference between revisions of "Body Design Options"

From apertus wiki
Jump to: navigation, search
Line 3: Line 3:
<blockquote>Outputs directly on main electronic board. It really doesn't take much of an impact to have a dead headphone output. For example. Too often, protruding elements are only thought of when designing the body itself, while the cable that goes in it should be considered part of the system</blockquote>
<blockquote>Outputs directly on main electronic board. It really doesn't take much of an impact to have a dead headphone output. For example. Too often, protruding elements are only thought of when designing the body itself, while the cable that goes in it should be considered part of the system</blockquote>
<blockquote>Wouldn't be possible to have the Beta built as a cage directly? With a lot of mounting points built in? For monitor arm, 15mm bars, heavy duty base plates etc.</blockquote>
<blockquote>Wouldn't be possible to have the Beta built as a cage directly? With a lot of mounting points built in? For monitor arm, 15mm bars, heavy duty base plates etc.</blockquote>
intracube: <blockquote>would like the camera dimensions/size to be similar to the Alexa</blockquote>


anton (http://octoray.co.uk/axiom/): <blockquote>big and sturdy body goess well with a sealed design when the case is a 120mm*120mm*40mm piece of milled aluminium which can be cooled by external fins/fan if needed</blockquote>
anton (http://octoray.co.uk/axiom/): <blockquote>big and sturdy body goess well with a sealed design when the case is a 120mm*120mm*40mm piece of milled aluminium which can be cooled by external fins/fan if needed</blockquote>


Bertl:<blockquote>it currently looks like you will be able to do that by separating the sensor module from the beta board :)</blockquote>
Bertl:<blockquote>it currently looks like you will be able to do that by separating the sensor module from the beta board :)</blockquote>

Revision as of 23:47, 13 October 2014

KurtAugust (http://www.magiclantern.fm/forum/index.php?topic=11787.msg131241#msg131241):

a lot of camera bodies only have one threaded hole in the bottom. One you attach a follow focus, it quite often becomes very difficult to get this to be rock solid. Having more holes for a 15mm bars attachment would solve this

Outputs directly on main electronic board. It really doesn't take much of an impact to have a dead headphone output. For example. Too often, protruding elements are only thought of when designing the body itself, while the cable that goes in it should be considered part of the system

Wouldn't be possible to have the Beta built as a cage directly? With a lot of mounting points built in? For monitor arm, 15mm bars, heavy duty base plates etc.

intracube:

would like the camera dimensions/size to be similar to the Alexa

anton (http://octoray.co.uk/axiom/):

big and sturdy body goess well with a sealed design when the case is a 120mm*120mm*40mm piece of milled aluminium which can be cooled by external fins/fan if needed

Bertl:

it currently looks like you will be able to do that by separating the sensor module from the beta board :)