Body Design Options

From apertus wiki
Revision as of 23:51, 13 October 2014 by 77.96.123.241 (talk)
Jump to: navigation, search

KurtAugust (http://www.magiclantern.fm/forum/index.php?topic=11787.msg131241#msg131241):

a lot of camera bodies only have one threaded hole in the bottom. One you attach a follow focus, it quite often becomes very difficult to get this to be rock solid. Having more holes for a 15mm bars attachment would solve this

Outputs directly on main electronic board. It really doesn't take much of an impact to have a dead headphone output. For example. Too often, protruding elements are only thought of when designing the body itself, while the cable that goes in it should be considered part of the system

Wouldn't be possible to have the Beta built as a cage directly? With a lot of mounting points built in? For monitor arm, 15mm bars, heavy duty base plates etc.

intracube:

would like the camera dimensions/size to be similar to the Alexa

anton (http://octoray.co.uk/axiom/):

big and sturdy body goes well with a sealed design when the case is a 120mm*120mm*40mm piece of milled aluminium which can be cooled by external fins/fan if needed

Bertl:

it currently looks like you will be able to do that by separating the sensor module from the beta board :)

I'm all for different designs, the only real design I want to see is the skeleton. I.e. a very basic framework which holds together the PCBs for development. Probably not even featuring sides or back, just a base and maybe the fan holder for the top but that's trivial to make and we will probably make it plastic So, best to get together and figure out the perfect case. Gather feedback from the community (probably best via mailing list). It needs to be a little flexible atm, because we haven't fixed the PCB design yet, so there might be small variations in sizes, but that shouldn't be a big problem I guess.

The Beta Board itself will match the size of the attached development board, so 4x2.25" on the MicroZed and PicoZed and 3.4x2.15" for the Parallella (not sure that will be interesting for movie folks though)