Line 13: Line 13:
 
Practical experience of cooling down a d450 sensor to sub-zero temperatures with Peltier
 
Practical experience of cooling down a d450 sensor to sub-zero temperatures with Peltier
 
http://nightskyinfocus.com/diyprojects/canon-450d-dslr-modification
 
http://nightskyinfocus.com/diyprojects/canon-450d-dslr-modification
 +
 +
 +
 +
Peltier cooling can be an upgrade pack for Beta
  
  

Revision as of 16:30, 30 September 2014

Panasonic PGS could be use to transfer the heat from the FPGA to the Camera Body. It can reduce weight and makes the Camera smaller in the ideal case the Apertus doesn’t need a fan. More Information: http://www.panasonic.com/industrial/electronic-components/protection/pyrolytic-graphite-sheet.aspx Video: http://www.youtube.com/watch?v=ZAEhyY1_czM


A hole can be cut in the PCB to allow a metal plate to touch the back of the sensor kac-sensor-socket-board.jpeg (image courtesy of danieel)


Practical experience of cooling down a d450 sensor to sub-zero temperatures with Peltier http://nightskyinfocus.com/diyprojects/canon-450d-dslr-modification


Peltier cooling can be an upgrade pack for Beta


danieel, speaking on KAC sensor [1]:

uncooled sensor without any thermal management gets to at most 45deg (internal reading).. so you should rather cool/separate the fpga, than care about a sensor (big package with relatively low power)