Difference between revisions of "Ergonomics Workgroup"

From apertus wiki
Jump to: navigation, search
Line 9: Line 9:


===Camera Enclosure Surface Finish Notes===
===Camera Enclosure Surface Finish Notes===
The typical options for surface finished of aluminum are sandblasting, abrasive blasting, anodizing, painting, powder coating.
The typical camera surface finish is called "Runzellack" which translates to: wrinkle paint.
The typical camera surface finish is called "Runzellack" which translates to: wrinkle paint.


Line 17: Line 20:


laser engraving is another cheap way to create labels but we would need to outsource that
laser engraving is another cheap way to create labels but we would need to outsource that
===Manufacturing Material Notes===
There are innovative wood-plastic combinations: http://www.fasal.at/ that feel similar like wood and are bio degradable. These can be used like any other injection molding raw material. The material is still in research and long term integrity, UV-resistance, etc. are unknown.


==Meeting 17th of November, 2014==
==Meeting 17th of November, 2014==

Revision as of 14:09, 19 November 2014

1 Meeting 3rd of November, 2014

1.1 Researching the lens mount patent situation

Mechanical dimensions cannot be patented so anyone can build a mount that particular lenses.

Of course the manufacturer names (Sony, Canon, etc.) are trademarked so we cannot advertize any mount as "Sony E-mount" we can only call it "e-mount" or "compatible with e-mount". The word "e-mount" is very likely not trademarked.

The electronic data exchange protocol is under a Sony/Canon/etc. licenses and to acquire it you need to sign contracts and pay fees, etc. In Europe though it is not illegal to reverse engineer something if it is required for you to make specific things "work" so we will be able to listen to what the lens is saying and being told to do and would be able to create software that sends/receives "similar" commands. This is in full compliance with the law.

1.2 Camera Enclosure Surface Finish Notes

The typical options for surface finished of aluminum are sandblasting, abrasive blasting, anodizing, painting, powder coating.

The typical camera surface finish is called "Runzellack" which translates to: wrinkle paint.

Painting Aluminum is not a trivial process.


Labels can easily be CNC engraved, then painted and the wet paint wiped away, that way the paint only remains in the engraved areas and dries there.

laser engraving is another cheap way to create labels but we would need to outsource that

1.3 Manufacturing Material Notes

There are innovative wood-plastic combinations: http://www.fasal.at/ that feel similar like wood and are bio degradable. These can be used like any other injection molding raw material. The material is still in research and long term integrity, UV-resistance, etc. are unknown.

2 Meeting 17th of November, 2014

AXIOM Beta Grip Handle Accessory Concept by Christoph Varga:

Christoph Varga Scan Grip Handle Concept.jpg

AXIOM Beta Cupboard Rig Concept by Christoph Varga:

Christoph Varga Cupboard Camera Rig Concept-small.jpg