File: Beta-simple-transparent-enclosure v0.2.svg

From apertus wiki
Revision as of 13:00, 6 August 2017 by Max bxl (talk | contribs) (Max bxl uploaded a new version of "File:Beta-simple-transparent-enclosure v0.2.svg": add the 3mm thickness warning)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Original file(SVG file, nominally 1,448 × 820 pixels, file size: 30 KB)

Simple transparent enclosure for the AXIOM Beta, version 0.2. Open and edit with Inkscape. Key : Black => to be cut Red => to be engraved Green => comments (not to be cut or engraved) Improvement possible : make the case slighty bigger (few mm wider for the front and back side), so the HDMI cable can fit nicely in the enclosure (and you don't need to shave some plastic off the cable).

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:00, 6 August 2017Thumbnail for version as of 13:00, 6 August 20171,448 × 820 (30 KB)Max bxl (talk | contribs)add the 3mm thickness warning
12:50, 6 August 2017Thumbnail for version as of 12:50, 6 August 20171,448 × 820 (29 KB)Max bxl (talk | contribs)
12:34, 6 August 2017Thumbnail for version as of 12:34, 6 August 20171,448 × 820 (29 KB)Max bxl (talk | contribs)Simple transparent enclosure for the AXIOM Beta, version 0.2. Open and edit with Inkscape. Key : Black => to be cut Red => to be engraved Green => comments (not to be cut or engraved) Improvement possible : make the case slighty bigger (few mm wider fo...

The following page uses this file: