Difference between revisions of "Lens Mounts"

From apertus wiki
Jump to: navigation, search
Line 32: Line 32:


[[File:E_Mount_Bayonet_2-small.jpg | 600px]]
[[File:E_Mount_Bayonet_2-small.jpg | 600px]]
[[File:E_Mount_Bayonet_3-small.jpg | 600px]]


Full 4800 DPI scans available for download at: http://files.apertus.org/AXIOM-Beta/e-mount-scans.zip
Full 4800 DPI scans available for download at: http://files.apertus.org/AXIOM-Beta/e-mount-scans.zip

Revision as of 18:17, 27 April 2016

1 Overview of Lensmounts

http://en.wikipedia.org/wiki/Lens_mount

1.1 E Mount

Seems to be a good choice because there are adapters available for almost every camera/lens type for reasonable cost. Even active mounts for Canon EF, etc.

Image of the E-Mount on dpreview.com

http://en.wikipedia.org/wiki/Sony_E-mount

Specs:

  • Outer diameter 46.1mm
  • Flange focal distance is very short: 18mm
  • Frame size APS-C, 35mm

Pros:

  • Short flange focal distance allows mechanical adapters to cover pretty much any lens mount out there
  • widely adopted

Cons:

  • not an open standard
  • licensing necessary for lens communication protocol -> reverse engineering required
  • using stack adapters reduces the accuracy and ruggedness of the whole system

Sony opens E-mount specifications. Seems we are on the safe side with using an E-mount adapter...

1.1.1 E-Mount Bayonet Scans

E Mount Bayonet Main.jpg

E Mount Bayonet 2-small.jpg

E Mount Bayonet 3-small.jpg

Full 4800 DPI scans available for download at: http://files.apertus.org/AXIOM-Beta/e-mount-scans.zip

1.1.2 E-Mount to EOS Adapter *Inside*

Inside of our E-mount to EOS adapter sample

E-mount-EOS 01.jpg

µC Board to translate from Sony E to Canon EOS


E-mount-EOS 02.jpg

EOS contacts with springs on the PCB side


E-mount-EOS 03.jpg

E-mount-EOS 04.jpg

JL ... position of the EOS mount contact springs


We can replace this board with our own adapter board to connect to the cameras I/O's

1.1.3 Passive EF Mount

1.1.4 Active Canon EF Mount

1.1.5 Passive Nikon F-Mount

Nikon-bayonet01.jpg Picture of Nikon F bayonet mount components.

Measured Bayonet Thickness: 1.3mm

1.1.6 Passive Micro Four Thirds Mount

1.2 Open standard Mount

P+S Technik offers with their IMS mount an open standard. For AXIOM Beta the adapters are too expensive, but for sure an option for AXIOM Gamma.

Is there a affordable really open standard mount out there?

please add it here...


1.3 Talk with a Canon Lens

Research links for the Canon EF-S Protocol

Electronic follow focus experiment