Difference between revisions of "May 2022 CP Enclosure"
(Created page with "We started collecting people interested in becoming AXIOM Beta Compact (CP) enclosure early adopters on May 1st. If you are interested please contact us: https://www.apertus.org/contact The idea is that we optimally gather a group of 10+ people to benefit from the manufacturing prices getting lower with raising quantities. Once we have a headcount we will be able to deliver an accurate estimate for the cost. To keep the cost low in general we plan to produce non-struc...") |
|||
| Line 14: | Line 14: | ||
* testing of internal fan, air circulation, temperature monitoring, fan control in software | * testing of internal fan, air circulation, temperature monitoring, fan control in software | ||
* starting efforts to design print labels on the enclosure (logo, instructions, connectors, etc.) | * starting efforts to design print labels on the enclosure (logo, instructions, connectors, etc.) | ||
==Parts== | |||
https://cloud.apertus.org/index.php/s/WCE3Z5G5wxQLMYA | |||
Revision as of 09:07, 2 May 2022
We started collecting people interested in becoming AXIOM Beta Compact (CP) enclosure early adopters on May 1st. If you are interested please contact us: https://www.apertus.org/contact
The idea is that we optimally gather a group of 10+ people to benefit from the manufacturing prices getting lower with raising quantities.
Once we have a headcount we will be able to deliver an accurate estimate for the cost.
To keep the cost low in general we plan to produce non-structural parts like connector plate covers as 3D print parts, the structural elements from milled aluminium:
Note that existing AXIOM Beta hardware can be integrated into the CP enclosure if a THT sensor board is used. The ZIF sensor board does not fit as it has a bigger form factor with the larger socket and the lever. Also the THT sensor board has an opening underneath the image sensor and we attach a heat sink from the back, this is not possible with the ZIF sensor board.
1 Early adopter goals
- collect general feedback about ergonomics, handling, look & feel
- testing of internal fan, air circulation, temperature monitoring, fan control in software
- starting efforts to design print labels on the enclosure (logo, instructions, connectors, etc.)