Search results

Jump to: navigation, search
  • The temperature can be read with (Firmware 2.0) script ([[AXIOM Beta Firmware Version 2.0]]) which contains the following code lines:
    6 KB (895 words) - 09:06, 1 October 2023
  • ...velopment environment for camera FPGA development and building and testing firmware images. Device 10: DMXking.com - ultraDMX Micro, Serial #: 84003036, firmware 1.44
    11 KB (1,766 words) - 10:46, 21 December 2020
  • In /boot/firmware/config.txt ===AXIOM Beta firmware flashing===
    19 KB (2,855 words) - 14:27, 21 March 2024
  • This page is for firmware 1.0. For firmware 2.0, check this page [[Factory Calibration (firmware 2.0)]].
    11 KB (1,644 words) - 07:13, 20 May 2020
  • # A special PIC firmware is used which does basically the same as the original one, but with slightl
    3 KB (504 words) - 03:50, 18 January 2020
  • [fb] firmware build 440.20 [fv] firmware version 0.97
    9 KB (1,411 words) - 08:58, 15 November 2017
  • This page is for firmware 2.0. For firmware 1.0, check this page [[Factory Calibration]]. This page is assuming you have installed firmware 2.0 on a microSD card of '''at least 16GB''', in order to capture darkframe
    12 KB (1,834 words) - 15:44, 18 January 2024
  • ...nt progress. [https://www.apertus.org/axiom-team-talk-15-4-optical-filters-firmware-2-article-june-2020 Article].
    6 KB (811 words) - 17:24, 13 September 2021
  • ...l be done over USB - having a separate microSD card containing the devices firmware is not planned.
    10 KB (1,652 words) - 19:57, 17 January 2023
  • ...via an I2C bus to the PS (ARM cores) part of the ZYNQ. First a small ZYNQ firmware is loaded (via xdev) to allow to ‘abuse’ the I2C bus for programming th
    6 KB (1,168 words) - 08:04, 20 June 2017
  • ...of the AXIOM Beta's [https://wiki.apertus.org/index.php/AXIOM_Beta/Manual#Firmware software] should be used. Only the bitstream should be a custom development * Onboard 4GB eMMC for firmware - the SD card slot could be used for recording.
    6 KB (920 words) - 21:45, 3 February 2022
  • Older versions of cmv_snap3 (current AXIOM Beta firmware still contains this old version) had a bug and swapped the order of even an ...atest version of [https://github.com/apertus-open-source-cinema/axiom-beta-firmware/tree/master/software/sensor_tools/snap cmv_snap3] on your AXIOM Beta to fix
    7 KB (920 words) - 15:06, 14 May 2020
  • 0. Flash the firmware → [[AXIOM_Beta_Firmware_Version_2.0]] ...IOM Beta USB port allows controlling the camera via wireless connection on Firmware 2.0.
    63 KB (9,865 words) - 08:05, 12 April 2024
  • ==Update Firmware==
    18 KB (2,886 words) - 16:49, 1 April 2018
  • * [https://github.com/apertus-open-source-cinema/axiom-beta-firmware/tree/fullstack Mavrx GitHub] ...resting for these tests because it gives easy access to the sensor and the firmware is open which would facilitate modification for our testing. If successful
    11 KB (1,678 words) - 17:39, 22 February 2021
  • ...Canon has issued legal warnings that forbid modification of their cameras' firmware. Serving, no doubt, as a 'shot across the bow' to anyone who seeks to make
    14 KB (2,247 words) - 11:37, 20 July 2019
  • * [https://wiki.apertus.org/index.php/AXIOM_Beta/Manual#Firmware Software/Firmware] is a work in progress.
    21 KB (3,240 words) - 02:23, 9 April 2020

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)