Stereo 3D Requirements

From apertus wiki
Revision as of 12:01, 19 November 2013 by Sebastian (talk | contribs)
Jump to: navigation, search
  • synchronous sensor trigger (genlock, trigger master-slave)
  • synchronous camera parameters (shutter, whitebalance, etc.)
  • sensor position finetuning (backfocus, top/bottom & left/right shift in a "few millimeters" area), roll & tilt compensation is not required
  • SDI output so the signals from both cameras can be converted into something 3d monitors can display with a device like this: http://www.aja.com/en/products/mini-converters/hi5-3d

Sensor diameter

The industry is still split between declaring DOF good or bad as esthetically element for S3D. In general a 2/3" sensor diameter is considered the standard for reduced DOF Stereo 3D recording.