Difference between revisions of "MicroSD Card Raid Plugin Module"
From apertus wiki
Line 3: | Line 3: | ||
===Size=== | ===Size=== | ||
2.5" SSD: 70 x 100mm | |||
1.8" SSD: 54 x 78mm | |||
One micro SD card: 11 x 15mm | One micro SD card: 11 x 15mm |
Revision as of 13:08, 11 March 2017
1 cost vs speed vs capacity vs size
1.1 Size
2.5" SSD: 70 x 100mm
1.8" SSD: 54 x 78mm
One micro SD card: 11 x 15mm
6x3 cards with small gap between cards and space to insert them plus an 23x23mm FPGA would require roughly the space of 64 x 104 mm (just slightly higher as the current 57.15mm that dual plugin modules occupy. Different layouts of cards are of course possible.
2 Concept
Dual Plugin Slot Module with total of 12 - 15 Gbps input
32 micro sd card slots with 16 cards on each PCB side: