(Created page with "The plan is to design a two part assembly of aluminium CNC milled front/back that are screwed together. Ongoing OnShape CAD design: https://cad.onshape.com/documents/f41e9dcb...")
 
 
Line 10: Line 10:
 
* test TFT in direct sunlight, consider options for shading screen on remote somehow.
 
* test TFT in direct sunlight, consider options for shading screen on remote somehow.
 
* Herbert suggested instead of screwing the PCB it could be clamped between front/back, he will share photos of this concept in action.
 
* Herbert suggested instead of screwing the PCB it could be clamped between front/back, he will share photos of this concept in action.
 +
 +
 +
----
 +
 +
[[category: CAD]]
 +
[[category: Enclosures]]
 +
[[category: AXIOM Remote]]
 +
[[category: Remote Control]]

Latest revision as of 10:42, 3 February 2019

The plan is to design a two part assembly of aluminium CNC milled front/back that are screwed together.

Ongoing OnShape CAD design: https://cad.onshape.com/documents/f41e9dcb61a8767f69b714af/w/009161441d6a06c023fb1540/e/982232b9f340d1f56d459ba2

CAD Todos:

  • design silicone rubber (or alternatively solid plastic single button) pads for buttons
  • design extension module mount (right side) and electronics connectors
  • design connector position
  • test TFT in direct sunlight, consider options for shading screen on remote somehow.
  • Herbert suggested instead of screwing the PCB it could be clamped between front/back, he will share photos of this concept in action.