Difference between revisions of "Beta Power Board"

From apertus wiki
Jump to: navigation, search
Line 14: Line 14:


* DC barrel connector attached directly to the PB with a cable
* DC barrel connector attached directly to the PB with a cable
* mechanical trimmer (discontinued) replacement
* mechanical trimmer (discontinued) replacement -> switching regulators with digital voltage control
* PICO SPOX power input connector will be moved "into" the PB so the cable can be routed inside the camera enclosure towards the backside
* PICO SPOX power input connector will be moved "into" the PB so the cable can be routed inside the camera enclosure towards the backside
* RGB LED and pushbutton (ALPS SKSNLAE010 currently considered) moved from smart power adapter to PB camera orientation top/left side
* RGB LED and pushbutton (ALPS SKSNLAE010 currently considered) moved from smart power adapter to PB camera orientation top/left side

Revision as of 07:50, 26 September 2017

PCB Top
PCB Bottom
PCB Top with components
PCB Bottom with components

1 About

TODO

2 Planned Changes for V2

  • DC barrel connector attached directly to the PB with a cable
  • mechanical trimmer (discontinued) replacement -> switching regulators with digital voltage control
  • PICO SPOX power input connector will be moved "into" the PB so the cable can be routed inside the camera enclosure towards the backside
  • RGB LED and pushbutton (ALPS SKSNLAE010 currently considered) moved from smart power adapter to PB camera orientation top/left side

3 Revisions

Current: AXIOM Beta Power Board v0.30



Archive:

AXIOM Beta Power Board v0.25

axiom beta power board v0.23

axiom beta power board v0.22 test

axiom beta power board v0.17 test

axiom beta power board v0.11 test

axiom beta power board v0.8 test

axiom beta power board v0.9 test


4 Calibrating Voltages

This describes the process required when factory assembling the power board hardware in the AXIOM Beta stack.


./power_init.sh
./power_on.sh

wait a bit

./pac1720_info.sh

This will output something like:

ZED_5V          4.8828 V [1f40]         +10.1562 mV [104]   +677.08 mA
BETA_5V         4.8828 V [1f40]          +1.2891 mV [021]    +85.94 mA
HDN             3.2812 V [1500]          +0.0000 mV [000]     +0.00 mA
PCIE_N_V        3.2422 V [14c0]          +0.0000 mV [000]     +0.00 mA
HDS             3.2031 V [1480]          +0.0000 mV [000]     +0.00 mA
PCIE_S_V        3.2422 V [14c0]          +0.0000 mV [000]     +0.00 mA
RFW_V           3.2422 V [14c0]          -0.0391 mV [fff]     -2.60 mA
IOW_V           3.2617 V [14e0]          +0.0000 mV [000]     +0.00 mA
RFE_V           3.2422 V [14c0]          +0.0000 mV [000]     +0.00 mA
IOE_V           3.2812 V [1500]          +0.0000 mV [000]     +0.00 mA
VCCO_35         2.4219 V [ f80]          -0.0391 mV [fff]     -2.60 mA
VCCO_13         2.4609 V [ fc0]          +0.0000 mV [000]     +0.00 mA
PCIE_IO         2.4609 V [ fc0]          -0.0781 mV [ffe]     -5.21 mA
VCCO_34         2.4609 V [ fc0]          +0.9766 mV [019]    +65.10 mA
W_VW            2.7734 V [11c0]          +0.0000 mV [000]     +0.00 mA
N_VW            2.8125 V [1200]          +0.0000 mV [000]     +0.00 mA
N_VN            2.7734 V [11c0]          -0.0391 mV [fff]     -2.60 mA
N_VE            2.8516 V [1240]          +0.0000 mV [000]     +0.00 mA
E_VE            2.6953 V [1140]          -0.0391 mV [fff]     -2.60 mA
S_VE            2.8516 V [1240]          +0.0000 mV [000]     +0.00 mA
S_VS            2.7344 V [1180]          -0.0391 mV [fff]     -2.60 mA
S_VW            2.8516 V [1240]          -0.0781 mV [ffe]     -5.21 mA

now run:

watch -n 0.2 ./pac1720_info.sh

which will display the voltages in a clear screen and constantly update the values until you press CTRL+C

The PCB labels and the labels in the CLI correspond like the following:

WW = W_VW
NW = N_VW
NN = N_VN
NE = N_VE
SW = S_VW
SS = S_VS
SE = S_VE
EE = E_VE

Use a tiny screwdriver and adjust the trimmers on the PCB until your values look like this:

W_VW          	2.4609 V [ fc0] 	 -0.0391 mV [fff]     -2.60 mA
N_VW          	3.2422 V [14c0] 	 +0.0000 mV [000]     +0.00 mA
N_VN          	1.8750 V [ c00] 	 -0.0391 mV [fff]     -2.60 mA
N_VE          	3.2617 V [14e0] 	 +0.0000 mV [000]     +0.00 mA
E_VE          	3.2812 V [1500] 	 +0.0391 mV [001]     +2.60 mA
S_VE          	1.9922 V [ cc0] 	 +0.0000 mV [000]     +0.00 mA
S_VS          	2.9883 V [1320] 	 -0.0391 mV [fff]     -2.60 mA
S_VW          	1.9531 V [ c80] 	 -0.1172 mV [ffd]     -7.81 mA