Difference between revisions of "Control Daemon"
|Line 37:||Line 37:|
Revision as of 10:25, 17 February 2019
>>>>TODO Overview text.
Currently, booting up the camera is as follows:
- A systemd service is activated which runs a shell script.
- This script then loads a bitstream into the FPGA and uses other scripts and C programs to train LVDS channels and set up the HDMI output
When the service is disabled, the user can run this script manually, which:
- Does not keep the user from running if it has already been activated by systemd.
- And on the other hand, simple scripts which query the registers (e.g. to get the temperature of the sensor) can be activated even if the FPGA bitstream didn't load.
All of those lead to a solid lockup of the Beta, because if you write to one of those memory addresses which are used for communicating with the PL, and there is no handler in the FPGA, the ARM cores lock up solid, no recovery possible they basically wait for an ACK/NACK forever.
TODO: Add image which shows structure of module communication (WebGUI -> RESTServer > Daemon, and back)
The control daemon project currently consists of three different modules:
- Web UI - HTML5, sends requests to the backend, currently by using JQuery (still evaluating alternatives).
- WSServer - receives WebSocket requests, converts them to Flatbuffers packages and sends them to the daemon, through socket.
- Daemon - processes flatbuffer packages received over a UNIX domain socket and calls suitable handler.
The communication with the daemon is done via a UNIX domain socket. There are two different protocols used when communicating with the daemon. A handshake protocol which tells the user what parameters and modules are available, their minimum and maximum value, as well as a description. (The handshake protocol is not implemented yet). The second protocol is used for writing and reading the different parameters. It uses Flatbuffers. The schema for Flatbuffers can be found here.
Communication of the Web UI with the daemon it bridged from the UNIX domain socket and flatbuffers to websocket and JSON by the WSServer. The WSServer accepts following fields, which get translated to the Flatbuffers schema (and vice versa):
|command||string||"set" or "get"|
|status||string||"success" or "fail"||used for reply from Daemon|
|message||string||status message, to get more info when request fails|
|timestamp||string||date and time of camera, when the request was send back to client|
TODO: Add JSON/REST package description from Lab (https://lab.apertus.org/T865)
Required packages (names are varying between Linux distributions):
- Install required packages
- Clone the repo
- cd into cloned repo
mkdir build && cd build
cmake -GNinja ..
4 Setup daemon
5 Setup WebUI
To set/get parameters from command line, DaemonCLI can be used:
Syntax: DaemonCLI <module> set/get <parameter> <value>
DaemonCLI image_sensor set analog_gain 2
6.1 Available modules
|general||General methods, like getting available parameters through get_available_methods|
6.2 Available parameters (per module)
|config_register||read/write arbitrary sensor config register|
7 Development notes
CMV12000Adapter will be used as example. Please look at the class for examples of implementation.
7.1 Add new parameters
Before registering new parameters, two methods should be added: a setter and a getter.
bool <setter_name>(std::string value1, std::string value2, std::string& message)
bool <getter_name>(std::string& value, std::string& message)
Note the ampersand (&) after the type, it is very important for returning multiple values. As methods can return only one value, bool in this case, variables can be passed by reference (&) to be able to set their values inside methods. Values can be modified as usual and the value will be passed back to the caller (see IDaemonModule.h and MessageHandler.cpp for examples).
Setter receives two values, in case just one is required value2 will be 0 (zero).
After the setter and getter are implemented, it's time to attach them to a parameter name. Here they are registered to gain parameter:
AddParameterHandler("analog_gain", GETTER_FUNC(&CMV12000Adapter::GetAnalogGain), SETTER_FUNC(&CMV12000Adapter::SetAnalogGain));
AddParameterHandler("digital_gain", GETTER_FUNC(&CMV12000Adapter::GetDigitalGain), SETTER_FUNC(&CMV12000Adapter::SetDigitalGain));
This code will attach methods like SetAnalogGain() and GetAnalogGain() to the corresponding parameter "analog_gain".
8 Unit tests
Unit tests have been added to the project to verify correct functionality. Catch2 framework is used because it's single-header only and utilizes the C++11 way of doing things.
Note: (for development on PC) - RAM access of the camera is different from x86/x64 CPUs, modified classes have to be used to bypass this, otherwise SEGFAULT would be the result.
In the CMake scripts a switch called ENABLE_MOCK was added so that users can disable any code which won't work on a regular PC (see CMV12000AdapterTests.cpp for an example). While running the build on camera
cmake .. is sufficient, but for development one should use:
$ cmake -DENABLE_MOCK=ON ..