(Test, just a test)
Line 15: Line 15:
==Handling the register block in RAW16 files==
Hello. And Bye.
The DNG converter expects the register block to be present so if it has not been saved with the image in camera:
To append an empty metadata block (sensor registers):
(cat old.raw16; dd if=/dev/zero bs=256 count=1) > new.raw16
To append an existing register block dumped into a file:
cat old.raw16 some.reg > new.raw16

Revision as of 17:46, 23 October 2014

1 Format Specifications

  • no header, big endian, 16bit (12msb padded with 4lsb zeroes)
  • starting at the top left, with 3072 rows of 4096 columns
  • the data is in bayer pattern RG/GB
  • image sensor registers dump (128 x 16bit, big endian) appended

2 Opening in Photoshop

  • rename the file extension from ".raw16" to ".raw"


2.1 Samples

XZ compressed sample files (use 7Zip to uncompress under windows: http://www.7-zip.org/)


Hello. And Bye.

3 RAW12

There is also the derived format that leaves out the 4 lsb zeros.

Convert RAW12 -> RAW16 with imagemagick:

convert -size 4096x3072 -depth 12 gray:input.raw12 -depth 16 gray:output.raw16