Raw processing recorder benchmarking
From apertus wiki
required footage
Alex can analyze the footage recorded by the 3rd party recorder and needs the following:
- short HDMI captured clip from the 3rd party recorder
- raw12 still image captured during the HDMI recording (its important that the framing is 100% identical so be sure to shoot this from a steady tripod and that operating the recorder does not move the camera the slightest - if there is a 1 pixel offset due to camera motion the test will not generate proper results)
- HDMI captured 1-minute clip with dark frames (lens cap on camera, black cloth covering camera in a completely dark room - its very important that absolutely no photon hits the sensor surface)